This is a major change, where Zsh modules/plugins are not git submodules
in the Zim repo anymore, but customized and installed separately as
individual repositories. The discussion about this started more than 2
years ago in #88. Closes#299.
This will allow contributors' modules to live in their own repositories.
See #33, #138, #262, #281, #324.
The current code has what, up to this point, I considered to be the best
balance between simplicity, execution speed and number of files.
One measured decision was to make the initialization of modules depend
only on the `':zim' modules` style, keeping it as fast as possible.
The `':zim:module' module` style is used to install, update and clean
the modules, all operations that happen after the user got his
as-blazing-fast-possible shell prompt.
Even though I didn't care much about making install or update fast,
`xargs` has a nice feature of allowing commands to be executed in
parallel with `-P`. I took advantage of that.
I've also worked on making the `zimfw` utility give the user some nice
(while still minimalistic) output. Also I'm suggesting this as the new
name for the `zmanage` tool, since `zimfw` does not shadow the `zim`
wiki tool.
* zsh-autosuggestions to release v0.6.3
* zsh-completions to release 0.30.0
* zsh-history-substring-search to HEAD
* zsh-syntax-highlighting to HEAD
* lean to HEAD
* liquidprompt to HEAD
* pure to release v1.10.3
Not needed in MacOS iTerm and Terminal, (u)rxvt, termite, alacritty and
gnome-terminal.
Does it do any good in any situation?
Closes#337
The develop branch already has this out:
229cea08e5/src/templates/zimrc.zsh.erb (L83-L85)
Use fuller format with committer info instead of medium format, as that
is more complete, and info for author and committer seems to fit in one
line each.
Fix one-line medium format so it truncates the subject at 50, instead of
at the fixed column 60, as that was not good to graph logs.
Remove `--all` from graph log aliases, to increase their flexibility.
We're then able to use it just for the current or for a branch passed
as parameter (as we already could with the other log aliases).
Copied from zimfw/git@63008c817e
Adds the following aliases:
- gmS: GPG-sign the resulting merge commit.
- gmV: Verify that the tip commit of the side branch being merged is
signed with a valid key, i.e. a key that has a valid uid: in the
default trust model, this means the signing key has been signed by a
trusted key. If the tip commit of the side branch is not signed with a
valid key, the merge is aborted.
Closes#333
and change the commit format to bold yellow, since that's the default
git log format for the commit when colored.
Closes#334
Copied from zimfw/git@013c9d9bf3
Stick with the following style:
* Header 1 with the module name is in `lowercase`.
* Other headers are in `Sentence case`. Common header names that should
be consistently used are `Aliases`, `Contributing`, `Functions`,
`Settings`, and `Zsh options`.
* The names `Zim` and `Zsh` always appear capitalized, even in the
middle of sentences.
* Prefer
print 'code indented with 4 spaces'
instead of
```zsh
print 'code fenced by lines with three back-ticks'
print 'unless you want syntax highlighting'
```
Prefer `setopt NO_FOO` instead of `unsetopt FOO`, as former is easier to
document in the README.
Stick with the following style for the README:
* Header 1 with the module name is in `lowercase`.
* Other headers are in `Sentence case`. Common header names that should
be consistently used are `Aliases`, `Contributing`, `Functions`,
`Settings`, and `Zsh options`.
as they are not required (not even recommended) to be set along with
`SHARE_HISTORY`. See zshoptions(1) on `SHARE_HISTORY`:
> This option ... also causes your typed commands to be appended to the
> history file (the latter is like specifying `INC_APPEND_HISTORY`,
> which should be turned off if this option is in effect). The history
> lines are also output with timestamps ala `EXTENDED_HISTORY` ...
Also update copy in comments and in the README. Stick with the following
style for the README:
* Header 1 with the module name is in `lowercase`.
* Other headers are in `Sentence case`. Common header names that should
be consistently used are `Aliases`, `Functions`, `Settings`, and
`Zsh options`.
* The names `Zim` and `Zsh` always appear capitalized, even in the
middle of sentences.
Closes#313
Add a first step to explicitly start the Zsh shell, as some issues were
reported before because users were skipping this. See #214 for example.
Also mention `~/.zlogin` as part of the uninstalling process.
Use the following formatting styles:
* Headers >1 are in `Sentence case`.
* The names `Zim` and `Zsh` always appear capitalized, even in the
middle of sentences.
* Prefer
code indented with 4 spaces
instead of
```
code fenced by lines with three back-ticks
```
Closes#315
namely, the `gfu` alias, the `git-branch-delete-interactive` function,
and a couple of commands that are shadowed.
Command `gm` was reported in #59, and `grc` was reported in #139.
Prevent main repo `git status` reporting submodules having new files.
New files are usually zcompiled zsh files.
There's no way to .gitignore from main repo specific files in submodules
Closes#297
Current code will create an archive in the current directory with:
% archive ../test.tar.gz test.*
or will complain that the following archive doesn't exist in the current
directory (given it actually exists in the parent one):
% unarchive ../test.tar.gz
Fix that and allow archives in any directory.
Other changes:
* Use `<required_param>` instead of `[required_param]` in the usage text
* Don't explictly check if archive exists in `unarchive`, but let the
respective tool fail with its own message
Closes#312
My fault, I removed them in commit 78611457, but they are necessary.
Without them, we are getting the following error when one of the
terminfo[] values is empty:
init.zsh:14: bad set of key/value pairs for associative array
Fixes#310
Update installation instructions in README.md to use cat. Also add blank
lines at the end (instead of beginning) of template files, since they're
prepended (not appended) to existing files.
See difference of output between print and cat (zlogin having a blank
like at the end):
% print -rn "$(<zlogin)$(<test)"
#
# User configuration sourced by login shells
#
# Initialize zim
[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh# Hello world
% cat zlogin test
#
# User configuration sourced by login shells
#
# Initialize zim
[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
# Hello world
Fixes#94. Fixes#280. Closes#300
In double quotes, array elements are put into separate words when
using `"${(@)array}"` or `"${array[@]}"`. See zshexpn(1).
Also according to the Zsh documentation, these forms preserve empty
elements of the array.
instead of aliasing `ls` to `ls -G`.
CLICOLOR is detected not only by `ls`, but by `tree` too (starting with
version 1.8.0). See http://mama.indstate.edu/users/ice/tree/changes.html
It's probably more widely used by other tools too.
not just one directory.
Also use shorter versions of the `tar` parameters, since we were using a
mixture of the short and long ones among `archive` and `unarchive`.
About not using `$` inside `(( ))`, this is what the the section
ARITHMETIC EVALUATION in zshmisc(1) says:
> Named parameters and subscripted arrays can be referenced by name
> within an arithmetic expression without using the parameter expansion
> syntax.
And according to http://www.bash2zsh.com/zsh_refcard/refcard.pdf:
> `var` (does not require `$` in front unless some substitution e.g.
> `${#var}` is needed, `$` is error if `var` is to be modified)
Closes#308
Add missing local variable set.
Replace `>/dev/null 2>&1` by `&>/dev/null`.
Check return value of zstyle (if zero), instead of resulting string
value (if non-empty).
I think this change results in the _expected_ behavior. Users can always
override this by overriding the zstyle, as that is a benefit of using
zstyles.
Ref: https://www.zsh.org/mla/users/2015/msg00467.html
and `which _ssh_hosts`
Fixes#46. Closes#294.
based on https://stackoverflow.com/a/48509425/2654518, which is based on
http://rabexc.org/posts/pitfalls-of-ssh-agents
Current code has a few issues: depends on `SSH_AUTH_SOCK` and
`SSH_AGENT_PID` env variables, which might not be available in every
shell session; and tries to create a new socket for agent-forwarding by
checking `SSH_AUTH_SOCKET` instead of `SSH_AUTH_SOCK`.
Also, it's safer to create the env file with 066 mode and in the user
home directory.
About not using `$` inside `(( ))`, this is what the the section
ARITHMETIC EVALUATION in zshmisc(1) says:
> Named parameters and subscripted arrays can be referenced by name
> within an arithmetic expression without using the parameter expansion
> syntax.
And according to http://www.bash2zsh.com/zsh_refcard/refcard.pdf:
> `var` (does not require `$` in front unless some substitution e.g.
> `${#var}` is needed, `$` is error if `var` is to be modified)
Closes#292
Just binding ^[[A/^[[B does not work for some terminals, while not
binding them breaks zle widgets on other terminals. That's how crazy it
can get :- (
Fixes#293. Fixes#295.
See https://github.com/zsh-users/zsh-history-substring-search/issues/70
and comment by @molovo:
I was already binding keys _after_ `zle-line-init`, but I'm pulling
keycodes out of the `terminfo` module, which reports up
(`$terminfo[kcuu1]`) as `^[0A` instead of `^[[A`. Binding `^[[A`
manually mean up/down works with history-substring-search both
before and after `zle-line-init`, but if I bind `$terminfo[kcuu1]`
(`^[0a`), up/down only works *before* `zle-line-init`.
Closes#286
