ultimate-vim/sources_non_forked/ale/doc/ale-go.txt

===============================================================================
ALE Go Integration                                             *ale-go-options*


===============================================================================
Integration Information

The `gometalinter` linter is disabled by default. ALE enables `gofmt`,
`golint` and `go vet` by default. It also supports `staticcheck`, `go
build`,  `gosimple`, `golangserver`.

To enable `gometalinter`, update |g:ale_linters| as appropriate:
>
  " Enable all of the linters you want for Go.
  let g:ale_linters = {'go': ['gometalinter', 'gofmt']}
<
A possible configuration is to enable `gometalinter` and `gofmt` but paired
with the `--fast` option, set by |g:ale_go_gometalinter_options|. This gets you
the benefit of running a number of linters, more than ALE would by default,
while ensuring it doesn't run any linters known to be slow or resource
intensive.

g:ale_go_go_executable                                 *g:ale_go_go_executable*
                                                       *b:ale_go_go_executable*

  Type: |String|
  Default: `'go'`

  The executable that will be run for the `gobuild` and `govet` linters, and
  the `gomod` fixer.


g:ale_go_go111module                                     *g:ale_go_go111module*
                                                         *b:ale_go_go111module*
  Type: |String|
  Default: `''`

  Override the value of the `$GO111MODULE` environment variable for
  golang tools.


===============================================================================
bingo                                                            *ale-go-bingo*

g:ale_go_bingo_executable                           *g:ale_go_bingo_executable*
                                                    *b:ale_go_bingo_executable*
  Type: |String|
  Default: `'bingo'`

  Location of the bingo binary file.


g:ale_go_bingo_options                                 *g:ale_go_bingo_options*
                                                       *b:ale_go_bingo_options*
  Type: |String|
  Default: `''`


===============================================================================
cspell                                                          *ale-go-cspell*

See |ale-cspell-options|

===============================================================================
gobuild                                                        *ale-go-gobuild*

g:ale_go_gobuild_options                             *g:ale_go_gobuild_options*
                                                     *b:ale_go_gobuild_options*
  Type: |String|
  Default: `''`

  This variable can be set to pass additional options to the gobuild linter.
  They are injected directly after "go test".


===============================================================================
gofmt                                                            *ale-go-gofmt*

g:ale_go_gofmt_options                                 *g:ale_go_gofmt_options*
                                                       *b:ale_go_gofmt_options*
  Type: |String|
  Default: `''`

  This variable can be set to pass additional options to the gofmt fixer.


===============================================================================
gofumpt                                                        *ale-go-gofumpt*

g:ale_go_gofumpt_executable                       *g:ale_go_gofumpt_executable*
                                                  *b:ale_go_gofumpt_executable*
  Type: |String|
  Default: `'gofumpt'`

  Executable to run to use as the gofumpt fixer.

g:ale_go_gofumpt_options                             *g:ale_go_gofumpt_options*
                                                     *b:ale_go_gofumpt_options*
  Type: |String|
  Default: `''`

  Options to pass to the gofumpt fixer.


===============================================================================
golangci-lint                                            *ale-go-golangci-lint*

`golangci-lint` is a `lint_file` linter, which only lints files that are
written to disk. This differs from the default behavior of linting the buffer.
See: |ale-lint-file|

g:ale_go_golangci_lint_executable           *g:ale_go_golangci_lint_executable*
                                            *b:ale_go_golangci_lint_executable*
  Type: |String|
  Default: `'golangci-lint'`

  The executable that will be run for golangci-lint.


g:ale_go_golangci_lint_options                 *g:ale_go_golangci_lint_options*
                                               *b:ale_go_golangci_lint_options*
  Type: |String|
  Default: `'--enable-all'`

  This variable can be changed to alter the command-line arguments to the
  golangci-lint invocation.


g:ale_go_golangci_lint_package                 *g:ale_go_golangci_lint_package*
                                               *b:ale_go_golangci_lint_package*
  Type: |Number|
  Default: `0`

  When set to `1`, the whole Go package will be checked instead of only the
  current file.


===============================================================================
golangserver                                              *ale-go-golangserver*

g:ale_go_langserver_executable                 *g:ale_go_langserver_executable*
                                               *b:ale_go_langserver_executable*
  Type: |String|
  Default: `'go-langserver'`

  Location of the go-langserver binary file.


g:ale_go_langserver_options                       *g:ale_go_langserver_options*
                                                  *b:ale_go_langserver_options*
  Type: |String|
  Default: `''`

  Additional options passed to the go-langserver command. Note that the
  `-gocodecompletion` option is ignored because it is handled automatically
  by the |g:ale_completion_enabled| variable.


===============================================================================
golines                                                        *ale-go-golines*

g:ale_go_golines_executable                         *g:ale_go_lines_executable*
                                                    *b:ale_go_lines_executable*
  Type: |String|
  Default: `'golines'`

  Location of the golines binary file

g:ale_go_golines_options                             *g:ale_go_golines_options*
                                                     *b:ale_go_golines_options*
  Type: |String|
  Default: `''`

  Additional options passed to the golines command. By default golines has
  --max-length=100 (lines above 100 characters will be wrapped)


===============================================================================
golint                                                          *ale-go-golint*

g:ale_go_golint_executable                         *g:ale_go_golint_executable*
                                                   *b:ale_go_golint_executable*
  Type: |String|
  Default: `'golint'`

  This variable can be set to change the golint executable path.


g:ale_go_golint_options                               *g:ale_go_golint_options*
                                                      *b:ale_go_golint_options*
  Type: |String|
  Default: `''`

  This variable can be set to pass additional options to the golint linter.


===============================================================================
gometalinter                                              *ale-go-gometalinter*

`gometalinter` is a `lint_file` linter, which only lints files that are
written to disk. This differs from the default behavior of linting the buffer.
See: |ale-lint-file|

g:ale_go_gometalinter_executable             *g:ale_go_gometalinter_executable*
                                             *b:ale_go_gometalinter_executable*
  Type: |String|
  Default: `'gometalinter'`

  The executable that will be run for gometalinter.


g:ale_go_gometalinter_options                   *g:ale_go_gometalinter_options*
                                                *b:ale_go_gometalinter_options*
  Type: |String|
  Default: `''`

  This variable can be changed to alter the command-line arguments to the
  gometalinter invocation.

  Since `gometalinter` runs a number of linters that can consume a lot of
  resources it's recommended to set this option to a value of `--fast` if you
  use `gometalinter` as one of the linters in |g:ale_linters|. This disables a
  number of linters known to be slow or consume a lot of resources.


g:ale_go_gometalinter_lint_package         *g:ale_go_gometalinter_lint_package*
                                           *b:ale_go_gometalinter_lint_package*
  Type: |Number|
  Default: `0`

  When set to `1`, the whole Go package will be checked instead of only the
  current file.


===============================================================================
gopls                                                            *ale-go-gopls*

gopls is the official Go language server, and is enabled for use with ALE by
default.

To install the latest stable version of `gopls` to your `$GOPATH`, try the
following command: >

  GO111MODULE=on go get golang.org/x/tools/gopls@latest
<
If `$GOPATH` is readable by ALE, it should probably work without you having to
do anything else. See the `gopls` README file for more information:

https://github.com/golang/tools/blob/master/gopls/README.md


g:ale_go_gopls_executable                           *g:ale_go_gopls_executable*
                                                    *b:ale_go_gopls_executable*
  Type: |String|
  Default: `'gopls'`

  See |ale-integrations-local-executables|

  ALE will search for `gopls` in locally installed directories first by
  default, and fall back on a globally installed `gopls` if it can't be found
  otherwise.


g:ale_go_gopls_options                                 *g:ale_go_gopls_options*
                                                       *b:ale_go_gopls_options*
  Type: |String|
  Default: `''`

  Command-line options passed to the gopls executable. See `gopls -h`.


g:ale_go_gopls_fix_executable                   *g:ale_go_gopls_fix_executable*
                                                *b:ale_go_gopls_fix_executable*
  Type: |String|
  Default: `'gopls'`

  Executable to run to use as the gopls fixer.

g:ale_go_gopls_fix_options                         *g:ale_go_gopls_fix_options*
                                                   *b:ale_go_gopls_fix_options*
  Type: |String|
  Default: `''`

  Options to pass to the gopls fixer.


g:ale_go_gopls_init_options                       *g:ale_go_gopls_init_options*
                                                  *b:ale_go_gopls_init_options*
  Type: |Dictionary|
  Default: `{}`

  LSP initialization options passed to gopls. This can be used to configure
  the behaviour of gopls.

  Example: >
  let g:ale_go_gopls_init_options = {'ui.diagnostic.analyses': {
        \ 'composites': v:false,
        \ 'unusedparams': v:true,
        \ 'unusedresult': v:true,
        \ }}
<

  For a full list of supported analyzers, see:
  https://github.com/golang/tools/blob/master/gopls/doc/analyzers.md


g:ale_go_gopls_use_global                           *g:ale_go_gopls_use_global*
                                                    *b:ale_go_gopls_use_global*
  Type: |String|
  Default: `get(g:, 'ale_use_global_executables', 0)`

  See |ale-integrations-local-executables|


===============================================================================
govet                                                            *ale-go-govet*

g:ale_go_govet_options                                 *g:ale_go_govet_options*
                                                       *b:ale_go_govet_options*
  Type: |String|
  Default: `''`

  This variable can be set to pass additional options to the go vet linter.


===============================================================================
revive                                                          *ale-go-revive*

g:ale_go_revive_executable                         *g:ale_go_revive_executable*
                                                   *b:ale_go_revive_executable*
  Type: |String|
  Default: `'revive'`

  This variable can be set to change the revive executable path.


g:ale_go_revive_options                               *g:ale_go_revive_options*
                                                      *b:ale_go_revive_options*
  Type: |String|
  Default: `''`

  This variable can be set to pass additional options to the revive


===============================================================================
staticcheck                                                *ale-go-staticcheck*

g:ale_go_staticcheck_executable               *g:ale_go_staticcheck_executable*
                                              *b:ale_go_staticcheck_executable*
  Type: |String|
  Default: `'staticcheck'`

  See |ale-integrations-local-executables|

  ALE will search for `staticcheck` in locally installed directories first by
  default, and fall back on a globally installed `staticcheck` if it can't be
  found otherwise.


g:ale_go_staticcheck_options                     *g:ale_go_staticcheck_options*
                                                 *b:ale_go_staticcheck_options*
  Type: |String|
  Default: `''`

  This variable can be set to pass additional options to the staticcheck
  linter.


g:ale_go_staticcheck_lint_package           *g:ale_go_staticcheck_lint_package*
                                            *b:ale_go_staticcheck_lint_package*
  Type: |Number|
  Default: `1`

  When set to `1`, the whole Go package will be checked instead of only the
  current file.


g:ale_go_staticcheck_use_global               *g:ale_go_staticcheck_use_global*
                                              *b:ale_go_staticcheck_use_global*
  Type: |String|
  Default: `get(g:, 'ale_use_global_executables', 0)`

  See |ale-integrations-local-executables|


===============================================================================
  vim:tw=78:ts=2:sts=2:sw=2:ft=help:norl: