Update recommended path for zimfw.zsh in README.md

Respect NO_COLOR environment variable
See https://no-color.org/
2024-11-15 20:48:57 -05:00 · 2024-11-06 19:39:43 -05:00 · 2024-10-28 18:15:03 -05:00 · 2024-10-25 11:15:11 -05:00 · 2024-10-10 09:17:22 -05:00 · 2024-10-09 19:28:54 -05:00
34 changed files with 1052 additions and 677 deletions
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@ -7,7 +7,80 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0

 ## [Unreleased]

-_No unreleased changes._
+### Added
+
+- Also output zimfw config and zimfw.zsh script paths in `info` action,
+  following symlinks if any.
+- Don't output colors if `NO_COLOR` environment variable is set to a non-empty
+  value.
+
+## [1.15.1] - 2024-10-10
+
+### Fixed
+
+- Preserve original module if reinstall fails instead of removing it first.
+
+## [1.15.0] - 2024-10-08
+
+### Added
+
+- `reinstall` action, that removes and then installs again the modules that
+  failed any of the checks: (See [#542](https://github.com/zimfw/zimfw/issues/542))
+  - module was installed with the defined tool,
+  - module URL matches the defined one.
+- `--if-ostype` option to `zmodule`. This option is equivalent to
+  `--if "[[ \${OSTYPE} == ${1} ]]"`.
+
+### Changed
+
+- Ask before uninstalling each unused module, instead of asking just once for
+  all.
+- Add disclaimer comment at beginning of .zimrc file.
+
+## [1.14.0] - 2024-06-25
+
+### Changed
+
+- Don't expand `${HOME}` in the init.zsh script. (See
+  [#509](https://github.com/zimfw/zimfw/issues/509))
+- Don't allow calling `zmodule` from the command line. Let it fail with "command
+  not found" instead, as it's intended to be used only in the .zimrc script.
+- `ZIM_HOME` must be defined before sourcing zimfw.zsh. All documentation was
+  already doing so, hence not considering this as a breaking change.
+- Allow zimfw.zsh to exist anywhere else, not only inside `ZIM_HOME`. This
+  enables installing the zimfw.zsh script independently with a package manager.
+- Don't try to upgrade if sourced zimfw.zsh is not in a writable path.
+- Don't try actions that write to `ZIM_HOME` if user has no write permissions
+  there.
+
+### Fixed
+
+- Update error messages to hopefully make it clearer when either the git or the
+  degit tool is being used.
+- Set read permissions to generated init.zsh script, so it can be read from
+  other users.
+
+## [1.13.1] - 2024-04-28
+
+### Fixed
+
+- The `--strip` option in tar command is not BSD compatible.
+
+## [1.13.0] - 2024-02-17
+
+### Added
+
+- `--if-command` option to `zmodule`. This option is equivalent to
+  `--if "(( \${+commands[${1}]} ))"`.
+- `mkdir` tool option in `zmodule` that creates an empty directory. This allows
+  creating modules that contain only externally generated files.
+
+## [1.12.1] - 2023-09-16
+
+### Fixed
+
+- Expansion of prompt sequences in print statements causing text between
+  backticks to be executed by the shell.

 ## [1.12.0] - 2023-07-17

@ -30,7 +103,7 @@ _No unreleased changes._

 ### Deprecated

- The `zmodule check-dumpfile` action. The [completion] module alone now handles
+- `check-dumpfile` action. The [completion] module alone now handles
  checking the dumpfile. (See
  [zimfw/completion#12](https://github.com/zimfw/completion/pull/12))

@ -114,7 +187,7 @@ _No unreleased changes._
  [here](https://github.com/zimfw/completion/blob/9386a76eac3f55b1c04d57d26238f725b4b3ba25/init.zsh#L10-L11).
 - Don't compile user Zsh startup scripts anymore
  (See [#450](https://github.com/zimfw/zimfw/pull/450)). This means you can:
-  - either manually delete the compiled files, as they won't be updated by Zim
+  - either manually delete the compiled files, as they won't be updated by zimfw
    anymore (recommended):
    ```
    for zfile in ${ZDOTDIR:-${HOME}}/.z(shenv|profile|shrc|login|logout); do
@ -315,7 +388,7 @@ Take your time to review the updated [README.md] and the changes listed below.
 - The Zim "core" is reduced to a single file, namely zimfw.zsh, that is
  self-updated without requiring git. With this, `ZIM_HOME` is not (the root of)
  a git repo anymore.
- Zsh and modules are configured in .zshrc instead of .zimrc.
+- Zsh and modules are initialized in .zshrc instead of .zimrc.
 - .zimrc is not sourced during Zsh startup anymore, and only contains the module
  definitions.
 - Zim's init.zsh and login_init.zsh scripts are generated by the `zimfw` CLI
@ -354,7 +427,13 @@ Take your time to review the updated [README.md] and the changes listed below.
 [termtitle]: https://github.com/zimfw/termtitle
 [s1ck94]: https://github.com/zimfw/s1ck94

-[Unreleased]: https://github.com/zimfw/zimfw/compare/v1.12.0...HEAD
+[Unreleased]: https://github.com/zimfw/zimfw/compare/v1.15.1...HEAD
+[1.15.1]: https://github.com/zimfw/zimfw/compare/v1.15.0...v1.15.1
+[1.15.0]: https://github.com/zimfw/zimfw/compare/v1.14.0...v1.15.0
+[1.14.0]: https://github.com/zimfw/zimfw/compare/v1.13.1...v1.14.0
+[1.13.1]: https://github.com/zimfw/zimfw/compare/v1.13.0...v1.13.1
+[1.13.0]: https://github.com/zimfw/zimfw/compare/v1.12.1...v1.13.0
+[1.12.1]: https://github.com/zimfw/zimfw/compare/v1.12.0...v1.12.1
 [1.12.0]: https://github.com/zimfw/zimfw/compare/v1.11.3...v1.12.0
 [1.11.3]: https://github.com/zimfw/zimfw/compare/v1.11.2...v1.11.3
 [1.11.2]: https://github.com/zimfw/zimfw/compare/v1.11.1...v1.11.2
--- a/2
+++ b/2
@ -1,7 +1,7 @@
 MIT License

 Copyright (c) 2015-2016 Matt Hamilton and contributors
-Copyright (c) 2016-2023 Eric Nielsen, Matt Hamilton and contributors
+Copyright (c) 2016-2024 Eric Nielsen, Matt Hamilton and contributors

 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal
--- a/README.md
+++ b/README.md
@ -17,7 +17,7 @@
 What is Zim?
 ------------
 Zim is a Zsh configuration framework that bundles a [plugin manager](#usage),
-useful [modules], and a wide variety of [themes], without compromising on [speed].
+useful [modules] and a wide variety of [themes], without compromising on [speed].

 Check how Zim compares to other frameworks and plugin managers:

@ -47,15 +47,17 @@ Installing Zim is easy. You can choose either the automatic or manual method bel
 This will install a predefined set of modules and a theme for you.

 * With `curl`:
-
-      curl -fsSL https://raw.githubusercontent.com/zimfw/install/master/install.zsh | zsh
+  ```zsh
+  curl -fsSL https://raw.githubusercontent.com/zimfw/install/master/install.zsh | zsh
+  ```

 * With `wget`:
-
-      wget -nv -O - https://raw.githubusercontent.com/zimfw/install/master/install.zsh | zsh
+  ```zsh
+  wget -nv -O - https://raw.githubusercontent.com/zimfw/install/master/install.zsh | zsh
+  ```

 Restart your terminal and you're done. Enjoy your Zsh IMproved! Take some time
-to tweak your [`~/.zshrc`](#set-up-zshrc) file, and to also check the available
+to tweak your [`~/.zshrc`](#set-up-zshrc) file and to also check the available
 [modules] and [themes] you can add to your [`~/.zimrc`](#create-zimrc).

 ### Manual installation
@ -79,19 +81,27 @@ Add the lines below to your `~/.zshrc` file, in the following order:
   ```zsh
   zstyle ':zim:zmodule' use 'degit'
   ````
-   This is optional, and only required if you don't have `git` installed (yes,
-   Zim works even without `git`!)
+   This is optional and only required if you don't have `git` installed (yes,
+   zimfw works even without `git`!)

-2. To set where the directory used by Zim will be located:
+2. To set where the zimfw plugin manager configuration file will be located:
+   ```zsh
+   ZIM_CONFIG_FILE=~/.config/zsh/zimrc
+   ```
+   This is optional. The value of `ZIM_CONFIG_FILE` can be any path your user
+   has at least read access to. By default, the file must be at `~/.zimrc`, if
+   the `ZDOTDIR` environment variable is not defined. Otherwise, it must be at
+   `${ZDOTDIR}/.zimrc`.
+
+3. To set the directory where the zimfw plugin manager will keep necessary files:
   ```zsh
   ZIM_HOME=~/.zim
   ```
   The value of `ZIM_HOME` can be any directory your user has write access to.
   You can even set it to a cache directory like `${XDG_CACHE_HOME}/zim` or
-   `~/.cache/zim` if you also include the step below, that automatically
-   downloads the `zimfw` plugin manager.
+   `~/.cache/zim`.

-3. To automatically download the `zimfw` plugin manager if missing:
+4. To automatically download the zimfw plugin manager if missing:
   ```zsh
   # Download zimfw plugin manager if missing.
   if [[ ! -e ${ZIM_HOME}/zimfw.zsh ]]; then
@ -107,22 +117,27 @@ Add the lines below to your `~/.zshrc` file, in the following order:
         https://github.com/zimfw/zimfw/releases/latest/download/zimfw.zsh
   fi
   ```
-   This is optional. If you choose to not include this step, you should manually
-   download the `zimfw.zsh` script once and keep it at `${ZIM_HOME}`.
+   This is optional. Alternatively, you can download the `zimfw.zsh` script
+   anywhere your user has write access to: just replace the occurrences of
+   `${ZIM_HOME}/zimfw.zsh` by the preferred path, like `/usr/local/share/zimfw/zimfw.zsh`
+   for example. If you choose to not include this step, you should manually
+   download the `zimfw.zsh` script once and keep it at the preferred path.

-4. To automatically install missing modules and update the static initialization
+5. To automatically install missing modules and update the static initialization
   script if missing or outdated:
   ```zsh
-   # Install missing modules, and update ${ZIM_HOME}/init.zsh if missing or outdated.
-   if [[ ! ${ZIM_HOME}/init.zsh -nt ${ZDOTDIR:-${HOME}}/.zimrc ]]; then
+   # Install missing modules and update ${ZIM_HOME}/init.zsh if missing or outdated.
+   if [[ ! ${ZIM_HOME}/init.zsh -nt ${ZIM_CONFIG_FILE:-${ZDOTDIR:-${HOME}}/.zimrc} ]]; then
     source ${ZIM_HOME}/zimfw.zsh init -q
   fi
   ```
   This step is optional, but highly recommended. If you choose to not include
-   it, you must remember to manually run `zimfw install` every time after you
-   update your [`~/.zimrc`](#create-zimrc) file.
+   it, you must remember to manually run `zimfw install` every time you update
+   your [`~/.zimrc`](#create-zimrc) file. If you have chosen to keep the
+   `zimfw.zsh` in a different path as mentioned in the previous step, replace
+   `${ZIM_HOME}/zimfw.zsh` by the chosen path.

-5. To source the static script, that will initialize your modules:
+6. To source the static script, that will initialize your modules:
   ```zsh
   # Initialize modules.
   source ${ZIM_HOME}/init.zsh
@ -130,18 +145,31 @@ Add the lines below to your `~/.zshrc` file, in the following order:

 #### Create `~/.zimrc`

-You must create your `.zimrc` file at `~/.zimrc`, if the `ZDOTDIR` environment
-variable is not defined. Otherwise, it must be at `${ZDOTDIR}/.zimrc`. It's
-referred to as `~/.zimrc` in the documentation for the sake of simplicity.
+This file configures the zimfw plugin manager. It's referred to as `~/.zimrc`
+in the documentation for the sake of simplicity, but the actual location of the
+file is defined by the following rules:

-You can start with just:
+1. You can define the full path and name of the file with a `ZIM_CONFIG_FILE`
+   environment variable. For example:
+   ```zsh
+   ZIM_CONFIG_FILE=~/.config/zsh/zimrc
+   ```
+
+2. Or, if you defined a `ZDOTDIR` environment variable, then the file must be at
+   `${ZDOTDIR}/.zimrc`
+
+3. Otherwise, it must be at at `~/.zimrc`, which is it's default location.
+
+As for the contents of the file, you can start with just:
 ```zsh
 zmodule zsh-users/zsh-syntax-highlighting
 zmodule zsh-users/zsh-autosuggestions
 ```

 If you also want one of our prompt [themes]:
-```
+```zsh
+zmodule git-info
+zmodule duration-info
 zmodule asciiship
 zmodule zsh-users/zsh-syntax-highlighting
 zmodule zsh-users/zsh-autosuggestions
@ -149,6 +177,8 @@ zmodule zsh-users/zsh-autosuggestions

 If you want to use our [completion] module too, instead of using `compinit` directly:
 ```zsh
+zmodule git-info
+zmodule duration-info
 zmodule asciiship
 zmodule zsh-users/zsh-completions --fpath src
 zmodule completion
@ -166,15 +196,15 @@ define the modules you want to use.

 Usage
 -----
-The `zimfw` plugin manager installs your modules at `${ZIM_HOME}/modules`, and
+The zimfw plugin manager installs your modules at `${ZIM_HOME}/modules` and
 builds a static script at `${ZIM_HOME}/init.zsh` that will initialize them. Your
 modules are defined in your `~/.zimrc` file.

 The `~/.zimrc` file must contain `zmodule` calls to define the modules to be
-initialized. The initialization will be done in the same order it's defined.
+initialized. The modules will be initialized in the same order they're defined.

-The `~/.zimrc` file is not sourced during Zsh startup, and it's only used to
-configure the `zimfw` plugin manager.
+The `~/.zimrc` file is not sourced during Zsh startup and it's only used to
+configure the zimfw plugin manager.

 Check [examples of `~/.zimrc` files](#create-zimrc) above.

@ -188,7 +218,7 @@ Below are some usage examples:
  * A module at an absolute path, that is already installed:
    `zmodule /usr/local/share/zsh-autosuggestions`
  * A module with a custom fpath: `zmodule zsh-users/zsh-completions --fpath src`
-  * A module with a custom initialization file, and with git submodules disabled:
+  * A module with a custom initialization file and with git submodules disabled:
    `zmodule spaceship-prompt/spaceship-prompt --source spaceship.zsh --no-submodules` or
    `zmodule spaceship-prompt/spaceship-prompt --name spaceship --no-submodules`
  * A module with two custom initialization files:
@ -227,7 +257,7 @@ zation will be done in the same order it&apos;s defined.
  &lt;url&gt;                      Module absolute path or repository URL. The following URL formats
                             are equivalent: <b>foo</b>, <b>zimfw/foo</b>, <b>https://github.com/zimfw/foo.git</b>.
                             If an absolute path is given, the module is considered externally
-                             installed, and won&apos;t be installed or updated by zimfw.
+                             installed and won&apos;t be installed or updated by zimfw.
  <b>-n</b>|<b>--name</b> &lt;module_name&gt;    Set a custom module name. Default: the last component in &lt;url&gt;.
                             Slashes can be used inside the name to organize the module into
                             subdirectories. The module will be installed at
@ -239,13 +269,16 @@ Per-module options:
                             Overrides the tag option. Default: the repository default branch.
  <b>-t</b>|<b>--tag</b> &lt;tag_name&gt;        Use specified tag when installing and updating the module. Over-
                             rides the branch option.
-  <b>-u</b>|<b>--use</b> &lt;<b>git</b>|<b>degit</b>&gt;       Install and update the module using the defined tool. Default is
-                             either defined by <b>zstyle &apos;:zim:zmodule&apos; use &apos;</b>&lt;<b>git</b>|<b>degit</b>&gt;<b>&apos;</b>, or <b>git</b>
-                             if none is provided.
-                             <b>git</b> requires git itself. Local changes are preserved on updates.
-                             <b>degit</b> requires curl or wget, and currently only works with GitHub
+  <b>-u</b>|<b>--use</b> &lt;tool_name&gt;       Install and update the module using the defined tool. Default is
+                             either defined by <b>zstyle &apos;:zim:zmodule&apos; use &apos;</b>&lt;tool_name&gt;<b>&apos;</b>, or <b>git</b>
+                             if none is provided. The tools available are:
+                             <b>git</b> uses the git command. Local changes are preserved on updates.
+                             <b>degit</b> uses curl or wget, and currently only works with GitHub
                             URLs. Modules install faster and take less disk space. Local
                             changes are lost on updates. Git submodules are not supported.
+                             <b>mkdir</b> creates an empty directory. The &lt;url&gt; is only used to set
+                             the module name. Use the <b>-c</b>|<b>--cmd</b> or <b>--on-pull</b> options to execute
+                             the desired command to generate the module files.
  <b>--no-submodules</b>            Don&apos;t install or update git submodules.
  <b>-z</b>|<b>--frozen</b>                Don&apos;t install or update the module.

@ -255,6 +288,12 @@ Per-module options:
 Per-module-root options:
  <b>--if</b> &lt;test&gt;                Will only initialize module root if specified test returns a zero
                             exit status. The test is evaluated at every new terminal startup.
+  <b>--if-command</b> &lt;cmd_name&gt;    Will only initialize module root if specified external command is
+                             available. This is evaluated at every new terminal startup.
+                             Equivalent to <b>--if &apos;(( ${+commands[</b>&lt;cmd_name&gt;<b>]} ))&apos;</b>.
+  <b>--if-ostype</b> &lt;ostype&gt;       Will only initialize module root if <b>OSTYPE</b> is equal to the given
+                             expression. This is evaluated at every new terminal startup.
+                             Equivalent to <b>--if &apos;[[ ${OSTYPE} == </b>&lt;ostype&gt;<b> ]]&apos;</b>.
  <b>--on-pull</b> &lt;command&gt;        Execute command after installing or updating the module. The com-
                             mand is executed in the module root directory.
  <b>-d</b>|<b>--disabled</b>              Don&apos;t initialize the module root or uninstall the module.
@ -293,17 +332,17 @@ The Zim plugin manager:
  * Added new modules to `~/.zimrc`? Run `zimfw install`.
  * Removed modules from `~/.zimrc`? Run `zimfw uninstall`.
  * Want to update your modules to their latest revisions? Run `zimfw update`.
-  * Want to upgrade `zimfw` to its latest version? Run `zimfw upgrade`.
-  * For more information about the `zimfw` plugin manager, run `zimfw help`.
+  * Want to upgrade zimfw to its latest version? Run `zimfw upgrade`.
+  * For more information about the zimfw plugin manager, run `zimfw help`.

 Settings
 --------
-Customize path of the directory used by Zim with the `ZIM_HOME` environment
+Set the path of the directory used by zimfw with the `ZIM_HOME` environment
 variable:

    ZIM_HOME=~/.zim

-By default, the `zimfw` plugin manager configuration file must be at `~/.zimrc`,
+By default, the zimfw plugin manager configuration file must be at `~/.zimrc`,
 if the `ZDOTDIR` environment variable is not defined. Otherwise, it must be at
 `${ZDOTDIR}/.zimrc`. You can customize its full path and name with the
 `ZIM_CONFIG_FILE` environment variable:
@ -316,11 +355,23 @@ lighter module installations, you can set degit as the default tool with:

    zstyle ':zim:zmodule' use 'degit'

-By default, `zimfw` will check if it has a new version available every 30 days.
-This can be disabled with:
+By default, zimfw will check if it has a new version available every 30 days. If
+the `zimfw.zsh` file cannot be upgraded, either because your user does not have
+write access to it, or because it was sourced from a symlink, then this will be
+disabled. This can be manually disabled with:

    zstyle ':zim' disable-version-check yes

+To disable color output from zimfw, prefix the zimfw call with `NO_COLOR=1`,
+like:
+
+    NO_COLOR=1 zimfw install
+
+or add the following to your `.zshrc`, which should also disable color output
+for other tools. See https://no-color.org/
+
+    export NO_COLOR=1
+
 Uninstalling
 ------------
 The best way to remove Zim is to manually delete `~/.zim`, `~/.zimrc`, and
--- a/src/functions/30_zmodule.zsh.erb
+++ b/src/functions/30_zmodule.zsh.erb
@ -0,0 +1,243 @@
+zmodule() {
+  local -r zusage="Usage: ${_zbold}${0}${_znormal} <url> [${_zbold}-n${_znormal}|${_zbold}--name${_znormal} <module_name>] [${_zbold}-r${_znormal}|${_zbold}--root${_znormal} <path>] [options]
+
+Add ${_zbold}zmodule${_znormal} calls to your ${_zbold}${_zconfig}${_znormal} file to define the modules to be initialized.
+The initialization will be done in the same order it's defined.
+
+  <url>                      Module absolute path or repository URL. The following URL formats
+                             are equivalent: ${_zbold}foo${_znormal}, ${_zbold}zimfw/foo${_znormal}, ${_zbold}https://github.com/zimfw/foo.git${_znormal}.
+                             If an absolute path is given, the module is considered externally
+                             installed and won't be installed or updated by zimfw.
+  ${_zbold}-n${_znormal}|${_zbold}--name${_znormal} <module_name>    Set a custom module name. Default: the last component in <url>.
+                             Slashes can be used inside the name to organize the module into
+                             subdirectories. The module will be installed at
+                             ${_zbold}${ZIM_HOME}/${_znormal}<module_name>.
+  ${_zbold}-r${_znormal}|${_zbold}--root${_znormal} <path>           Relative path to the module root.
+
+Per-module options:
+  ${_zbold}-b${_znormal}|${_zbold}--branch${_znormal} <branch_name>  Use specified branch when installing and updating the module.
+                             Overrides the tag option. Default: the repository default branch.
+  ${_zbold}-t${_znormal}|${_zbold}--tag${_znormal} <tag_name>        Use specified tag when installing and updating the module. Over-
+                             rides the branch option.
+  ${_zbold}-u${_znormal}|${_zbold}--use${_znormal} <tool_name>       Install and update the module using the defined tool. Default is
+                             either defined by ${_zbold}zstyle ':zim:zmodule' use '${_znormal}<tool_name>${_zbold}'${_znormal}, or ${_zbold}git${_znormal}
+                             if none is provided. The tools available are:
+                             ${_zbold}git${_znormal} uses the git command. Local changes are preserved on updates.
+                             ${_zbold}degit${_znormal} uses curl or wget, and currently only works with GitHub
+                             URLs. Modules install faster and take less disk space. Local
+                             changes are lost on updates. Git submodules are not supported.
+                             ${_zbold}mkdir${_znormal} creates an empty directory. The <url> is only used to set
+                             the module name. Use the ${_zbold}-c${_znormal}|${_zbold}--cmd${_znormal} or ${_zbold}--on-pull${_znormal} options to execute
+                             the desired command to generate the module files.
+  ${_zbold}--no-submodules${_znormal}            Don't install or update git submodules.
+  ${_zbold}-z${_znormal}|${_zbold}--frozen${_znormal}                Don't install or update the module.
+
+  The per-module options above are carried over multiple zmodule calls for the same module.
+  Modules are uniquely identified by their name.
+
+Per-module-root options:
+  ${_zbold}--if${_znormal} <test>                Will only initialize module root if specified test returns a zero
+                             exit status. The test is evaluated at every new terminal startup.
+  ${_zbold}--if-command${_znormal} <cmd_name>    Will only initialize module root if specified external command is
+                             available. This is evaluated at every new terminal startup.
+                             Equivalent to ${_zbold}--if '(( \${+commands[${_znormal}<cmd_name>${_zbold}]} ))'${_znormal}.
+  ${_zbold}--if-ostype${_znormal} <ostype>       Will only initialize module root if ${_zbold}OSTYPE${_znormal} is equal to the given
+                             expression. This is evaluated at every new terminal startup.
+                             Equivalent to ${_zbold}--if '[[ \${OSTYPE} == ${_znormal}<ostype>${_zbold} ]]'${_znormal}.
+  ${_zbold}--on-pull${_znormal} <command>        Execute command after installing or updating the module. The com-
+                             mand is executed in the module root directory.
+  ${_zbold}-d${_znormal}|${_zbold}--disabled${_znormal}              Don't initialize the module root or uninstall the module.
+
+  The per-module-root options above are carried over multiple zmodule calls for the same mod-
+  ule root.
+
+Per-call initialization options:
+  ${_zbold}-f${_znormal}|${_zbold}--fpath${_znormal} <path>          Will add specified path to fpath. The path is relative to the
+                             module root directory. Default: ${_zbold}functions${_znormal}, if the subdirectory
+                             exists and is non-empty.
+  ${_zbold}-a${_znormal}|${_zbold}--autoload${_znormal} <func_name>  Will autoload specified function. Default: all valid names inside
+                             the ${_zbold}functions${_znormal} subdirectory, if any.
+  ${_zbold}-s${_znormal}|${_zbold}--source${_znormal} <file_path>    Will source specified file. The path is relative to the module
+                             root directory. Default: ${_zbold}init.zsh${_znormal}, if a non-empty ${_zbold}functions${_znormal} sub-
+                             directory exists, else the largest of the files matching the glob
+                             ${_zbold}(init.zsh|${_znormal}<name>${_zbold}.(zsh|plugin.zsh|zsh-theme|sh))${_znormal}, if any.
+                             <name> in the glob is resolved to the last component of the mod-
+                             ule name, or the last component of the path to the module root.
+  ${_zbold}-c${_znormal}|${_zbold}--cmd${_znormal} <command>         Will execute specified command. Occurrences of the ${_zbold}{}${_znormal} placeholder
+                             in the command are substituted by the module root directory path.
+                             I.e., ${_zbold}-s 'foo.zsh'${_znormal} and ${_zbold}-c 'source {}/foo.zsh'${_znormal} are equivalent.
+
+  Setting any per-call initialization option above will disable the default values from the
+  other per-call initialization options, so only your provided values will be used. I.e. these
+  values are either all automatic, or all manual in each zmodule call. To use default values
+  and also provided values, use separate zmodule calls."
+  if (( ! # )); then
+    print -u2 -lR "${_zerror}${funcfiletrace[1]}: Missing zmodule url${_znormal}" '' ${zusage}
+    _zfailed=1
+    return 2
+  fi
+  local zurl=${1} zname=${1:t} zroot zarg
+  local -a zfpaths zfunctions zcmds
+  if [[ ${zurl} =~ ^[^:/]+: ]]; then
+    zname=${zname%.git}
+  elif [[ ${zurl} != /* ]]; then
+    # Count number of slashes
+    case ${#zurl//[^\/]/} in
+      0) zurl=https://github.com/zimfw/${zurl}.git ;;
+      1) zurl=https://github.com/${zurl}.git ;;
+    esac
+  fi
+  shift
+  while [[ ${1} == (-n|--name|-r|--root) ]]; do
+    if (( # < 2 )); then
+      print -u2 -lR "${_zerror}${funcfiletrace[1]}:${_zbold}${zname}:${_znormalred} Missing argument for zmodule option ${_zbold}${1}${_znormal}" '' ${zusage}
+      _zfailed=1
+      return 2
+    fi
+    case ${1} in
+      -n|--name)
+        shift
+        zname=${${1%%/##}##/##}
+        ;;
+      -r|--root)
+        shift
+        zroot=${${1%%/##}##/##}
+        ;;
+    esac
+    shift
+  done
+  if [[ ${zurl} == /* ]]; then
+    _zdirs[${zname}]=${zurl%%/##}
+    zurl=
+  else
+    _zdirs[${zname}]=${ZIM_HOME}/modules/${zname}
+  fi
+  if [[ ${+_zurls[${zname}]} -ne 0 && ${_zurls[${zname}]} != ${zurl} ]]; then
+    print -u2 -lR "${_zerror}${funcfiletrace[1]}:${_zbold}${zname}:${_znormalred} Module already defined with a different URL. Expected ${_zbold}${_zurls[${zname}]}${_znormal}" '' ${zusage}
+    _zfailed=1
+    return 2
+  fi
+  _zurls[${zname}]=${zurl}
+  local -r zroot_dir=${_zdirs[${zname}]}${zroot:+/${zroot}}
+  _zroot_dirs+=(${zroot_dir})
+  # Set default values
+  if (( ! ${+_ztools[${zname}]} )); then
+    zstyle -s ':zim:zmodule' use "_ztools[${zname}]" || _ztools[${zname}]=git
+  fi
+  if (( ! ${+_ztypes[${zname}]} )) _ztypes[${zname}]=branch
+  if (( ! ${+_zsubmodules[${zname}]} )) _zsubmodules[${zname}]=1
+  # Set values from options
+  while (( # > 0 )); do
+    case ${1} in
+      -b|--branch|-t|--tag|-u|--use|--on-pull|--if|--if-command|--if-ostype|-f|--fpath|-a|--autoload|-s|--source|-c|--cmd)
+        if (( # < 2 )); then
+          print -u2 -lR "${_zerror}${funcfiletrace[1]}:${_zbold}${zname}:${_znormalred} Missing argument for zmodule option ${_zbold}${1}${_znormal}" '' ${zusage}
+          _zfailed=1
+          return 2
+        fi
+        ;;
+    esac
+    case ${1} in
+      -b|--branch|-t|--tag|-u|--use|--no-submodules)
+        if [[ -z ${zurl} ]] _zimfw_print -u2 -R "${_zwarn}${funcfiletrace[1]}:${_zbold}${zname}:${_znormalyellow} The zmodule option ${_zbold}${1}${_znormalyellow} has no effect for external modules${_znormal}"
+        ;;
+    esac
+    case ${1} in
+      -b|--branch)
+        shift
+        _ztypes[${zname}]=branch
+        _zrevs[${zname}]=${1}
+        ;;
+      -t|--tag)
+        shift
+        _ztypes[${zname}]=tag
+        _zrevs[${zname}]=${1}
+        ;;
+      -u|--use)
+        shift
+        _ztools[${zname}]=${1}
+        ;;
+      --no-submodules) _zsubmodules[${zname}]=0 ;;
+      -z|--frozen) _zfrozens[${zname}]=1 ;;
+      --on-pull)
+        shift
+        zarg=${1}
+        if [[ -n ${zroot} ]] zarg="(builtin cd -q ${zroot}; ${zarg})"
+        _zonpulls[${zname}]="${_zonpulls[${zname}]+${_zonpulls[${zname}]}; }${zarg}"
+        ;;
+      --if)
+        shift
+        _zifs[${zroot_dir}]=${1}
+        ;;
+      --if-command)
+        shift
+        _zifs[${zroot_dir}]="(( \${+commands[${1}]} ))"
+        ;;
+      --if-ostype)
+        shift
+        _zifs[${zroot_dir}]="[[ \${OSTYPE} == ${1} ]]"
+        ;;
+      -f|--fpath)
+        shift
+        zarg=${1}
+        if [[ ${zarg} != /* ]] zarg=${zroot_dir}/${zarg}
+        zfpaths+=(${zarg})
+        ;;
+      -a|--autoload)
+        shift
+        zfunctions+=(${1})
+        ;;
+      -s|--source)
+        shift
+        zarg=${1}
+        if [[ ${zarg} != /* ]] zarg=${zroot_dir}/${zarg}
+        zcmds+=('source '${(qqq)zarg:a})
+        ;;
+      -c|--cmd)
+        shift
+        zcmds+=(${1//{}/${(qqq)zroot_dir:a}})
+        ;;
+      -d|--disabled) _zdisabled_root_dirs+=(${zroot_dir}) ;;
+      *)
+        print -u2 -lR "${_zerror}${funcfiletrace[1]}:${_zbold}${zname}:${_znormalred} Unknown zmodule option ${_zbold}${1}${_znormal}" '' ${zusage}
+        _zfailed=1
+        return 2
+        ;;
+    esac
+    shift
+  done
+  if (( _zflags & 1 )); then
+    _znames+=(${zname})
+  fi
+  if (( _zflags & 2 )); then
+    if [[ ! -e ${zroot_dir} ]]; then
+      print -u2 -R "${_zerror}${funcfiletrace[1]}:${_zbold}${zname}: ${zroot_dir}${_znormalred} not found${_znormal}"
+      _zfailed=1
+      return 1
+    fi
+    if (( ! ${#zfpaths} && ! ${#zfunctions} && ! ${#zcmds} )); then
+      zfpaths=(${zroot_dir}/functions(NF))
+      # _* functions are autoloaded by compinit
+      # prompt_*_setup functions are autoloaded by promptinit
+      zfunctions=(${^zfpaths}/^(*~|*.zwc(|.old)|_*|prompt_*_setup)(N-.:t))
+      local -ra prezto_scripts=(${zroot_dir}/init.zsh(N))
+      if (( ${#zfpaths} && ${#prezto_scripts} )); then
+        # this follows the prezto module format, no need to check for other scripts
+        zcmds=('source '${(qqq)^prezto_scripts:a})
+      else
+        # get script with largest size (descending `O`rder by `L`ength, and return only `[1]` first)
+        local -ra zscripts=(${zroot_dir}/(init.zsh|(${zname:t}|${zroot_dir:t}).(zsh|plugin.zsh|zsh-theme|sh))(NOL[1]))
+        zcmds=('source '${(qqq)^zscripts:a})
+      fi
+    fi
+    if (( ! ${#zfpaths} && ! ${#zfunctions} && ! ${#zcmds} )); then
+      _zimfw_print -u2 -lR "${_zwarn}${funcfiletrace[1]}:${_zbold}${zname}:${_znormalyellow} Nothing found to be initialized. Customize the module name, root or initialization with ${_zbold}zmodule${_znormalyellow} options.${_znormal}" '' ${zusage}
+    fi
+    # Prefix is added to all _zfpaths, _zfunctions and _zcmds to distinguish the originating root dir
+    local -r zpre=${zroot_dir}$'\0'
+    _zfpaths+=(${zpre}${^zfpaths})
+    _zfunctions+=(${zpre}${^zfunctions})
+    zcmds=(${zcmds//${HOME}/\${HOME}})
+    _zcmds+=(${zpre}${^zcmds})
+  fi
+}
--- a/src/stage2/20_guard.zsh.erb
+++ b/src/stage2/20_guard.zsh.erb
@ -1,8 +1,12 @@
 autoload -Uz is-at-least && if ! is-at-least <%= min_zsh_version %>; then
-  print -u2 -PR "%F{red}${0}: Error starting Zim. You're using Zsh version %B${ZSH_VERSION}%b and versions < %B<%= min_zsh_version %>%b are not supported. Upgrade your Zsh.%f"
+  print -u2 -R "${_zred}${0}: Error starting zimfw. You're using Zsh version ${_zbold}${ZSH_VERSION}${_znormalred} and versions < ${_zbold}<%= min_zsh_version %>${_znormalred} are not supported. Update your Zsh.${_znormal}"
  return 1
 fi
 autoload -Uz zargs

-# Define Zim location
-if (( ! ${+ZIM_HOME} )) typeset -g ZIM_HOME=${0:h}
+if (( ! ${+ZIM_HOME} )); then
+  print -u2 -R "${_zred}${0}: ${_zbold}ZIM_HOME${_znormalred} not defined${_znormal}"
+  return 1
+fi
+# Define zimfw location
+typeset -g __ZIMFW_FILE=${0}
--- a/src/stage2/28_zimfw_mv.zsh.erb
+++ b/src/stage2/28_zimfw_mv.zsh.erb
@ -2,11 +2,11 @@ _zimfw_mv() {
  local -a cklines
  if cklines=(${(f)"$(command cksum ${1} ${2} 2>/dev/null)"}) && \
      [[ ${${(z)cklines[1]}[1,2]} == ${${(z)cklines[2]}[1,2]} ]]; then
-    _zimfw_print -PR "<%= okay %>%B${2}:%b Already up to date"
+    _zimfw_print -R "${_zokay}${_zbold}${2}:${_znormal} Already up to date"
  else
    if [[ -e ${2} ]]; then
      command mv -f ${2}{,.old} || return 1
    fi
-    command mv -f ${1} ${2} && _zimfw_print -PR "<%= okay %>%B${2}:%b Updated.${_zrestartmsg}"
+    command mv -f ${1} ${2} && command chmod a+r ${2} && _zimfw_print -R "${_zokay}${_zbold}${2}:${_znormal} Updated.${_zrestartmsg}"
  fi
 }
--- a/src/stage2/29_zimfw_build_init.zsh.erb
+++ b/src/stage2/29_zimfw_build_init.zsh.erb
@ -1,12 +1,14 @@
 _zimfw_build_init() {
  local -r ztarget=${ZIM_HOME}/init.zsh
  # Force update of init.zsh if it's older than .zimrc
-  if [[ ${ztarget} -ot ${ZIM_CONFIG_FILE:-<%= home %>/.zimrc} ]]; then
+  if [[ ${ztarget} -ot ${_zconfig} ]]; then
    command mv -f ${ztarget}{,.old} || return 1
  fi
  _zimfw_mv =(
-    print -R "zimfw() { source ${(q-)ZIM_HOME}/zimfw.zsh \"\${@}\" }"
-    print -R "zmodule() { source ${(q-)ZIM_HOME}/zimfw.zsh \"\${@}\" }"
+    print -R '# FILE AUTOMATICALLY GENERATED FROM '${_zconfig}
+    print '# EDIT THE SOURCE FILE AND THEN RUN zimfw build. DO NOT DIRECTLY EDIT THIS FILE!'
+    print
+    print -R 'if [[ -e ${ZIM_CONFIG_FILE:-<%= home %>/.zimrc} ]] zimfw() { source '${${(qqq)__ZIMFW_FILE}/${HOME}/\${HOME}}' "${@}" }'
    local zroot_dir zpre
    local -a zif_functions zif_cmds zroot_functions zroot_cmds
    local -a zfunctions=(${_zfunctions}) zcmds=(${_zcmds})
@ -22,7 +24,7 @@ _zimfw_build_init() {
      fi
    done
    zpre=$'*\0'
-    if (( ${#_zfpaths} )) print 'fpath=('${(q-)${_zfpaths#${~zpre}}:a}' ${fpath})'
+    if (( ${#_zfpaths} )) print -R 'fpath=('${${(qqq)${_zfpaths#${~zpre}}:a}/${HOME}/\${HOME}}' ${fpath})'
    if (( ${#zfunctions} )) print -R 'autoload -Uz -- '${zfunctions#${~zpre}}
    for zroot_dir in ${_zroot_dirs}; do
      zpre=${zroot_dir}$'\0'
--- a/src/stage2/29_zimfw_build_login_init.zsh.erb
+++ b/src/stage2/29_zimfw_build_login_init.zsh.erb
@ -1,7 +1,7 @@
 _zimfw_build_login_init() {
  local -r ztarget=${ZIM_HOME}/login_init.zsh
  # Force update of login_init.zsh if it's older than .zimrc
-  if [[ ${ztarget} -ot ${ZIM_CONFIG_FILE:-<%= home %>/.zimrc} ]]; then
+  if [[ ${ztarget} -ot ${_zconfig} ]]; then
    command mv -f ${ztarget}{,.old} || return 1
  fi
  _zimfw_mv =(
--- a/src/stage2/30_zimfw_build.zsh.erb
+++ b/src/stage2/30_zimfw_build.zsh.erb
@ -1,3 +1,3 @@
 _zimfw_build() {
-  _zimfw_build_init && _zimfw_build_login_init && _zimfw_print -P '<%= done %>Done with build.'
+  _zimfw_build_init && _zimfw_build_login_init && _zimfw_print 'Done with build.'
 }
--- a/src/stage2/30_zmodule.zsh.erb
+++ b/src/stage2/30_zmodule.zsh.erb
@ -1,230 +0,0 @@
-zmodule() {
-  local -r ztarget=${ZIM_CONFIG_FILE:-<%= home %>/.zimrc}
-  local -r zusage="Usage: %B${0}%b <url> [%B-n%b|%B--name%b <module_name>] [%B-r%b|%B--root%b <path>] [options]
-
-Add %Bzmodule%b calls to your %B${ztarget}%b file to define the modules to be initialized.
-The initialization will be done in the same order it's defined.
-
-  <url>                      Module absolute path or repository URL. The following URL formats
-                             are equivalent: %Bfoo%b, %Bzimfw/foo%b, %Bhttps://github.com/zimfw/foo.git%b.
-                             If an absolute path is given, the module is considered externally
-                             installed, and won't be installed or updated by zimfw.
-  %B-n%b|%B--name%b <module_name>    Set a custom module name. Default: the last component in <url>.
-                             Slashes can be used inside the name to organize the module into
-                             subdirectories. The module will be installed at
-                             %B${ZIM_HOME}/%b<module_name>.
-  %B-r%b|%B--root%b <path>           Relative path to the module root.
-
-Per-module options:
-  %B-b%b|%B--branch%b <branch_name>  Use specified branch when installing and updating the module.
-                             Overrides the tag option. Default: the repository default branch.
-  %B-t%b|%B--tag%b <tag_name>        Use specified tag when installing and updating the module. Over-
-                             rides the branch option.
-  %B-u%b|%B--use%b <%%Bgit%b|%Bdegit%b>       Install and update the module using the defined tool. Default is
-                             either defined by %Bzstyle ':zim:zmodule' use '%b<%%Bgit%b|%Bdegit%b>%B'%b, or %Bgit%b
-                             if none is provided.
-                             %Bgit%b requires git itself. Local changes are preserved on updates.
-                             %Bdegit%b requires curl or wget, and currently only works with GitHub
-                             URLs. Modules install faster and take less disk space. Local
-                             changes are lost on updates. Git submodules are not supported.
-  %B--no-submodules%b            Don't install or update git submodules.
-  %B-z%b|%B--frozen%b                Don't install or update the module.
-
-  The per-module options above are carried over multiple zmodule calls for the same module.
-  Modules are uniquely identified by their name.
-
-Per-module-root options:
-  %B--if%b <test>                Will only initialize module root if specified test returns a zero
-                             exit status. The test is evaluated at every new terminal startup.
-  %B--on-pull%b <command>        Execute command after installing or updating the module. The com-
-                             mand is executed in the module root directory.
-  %B-d%b|%B--disabled%b              Don't initialize the module root or uninstall the module.
-
-  The per-module-root options above are carried over multiple zmodule calls for the same mod-
-  ule root.
-
-Per-call initialization options:
-  %B-f%b|%B--fpath%b <path>          Will add specified path to fpath. The path is relative to the
-                             module root directory. Default: %Bfunctions%b, if the subdirectory
-                             exists and is non-empty.
-  %B-a%b|%B--autoload%b <func_name>  Will autoload specified function. Default: all valid names inside
-                             the %Bfunctions%b subdirectory, if any.
-  %B-s%b|%B--source%b <file_path>    Will source specified file. The path is relative to the module
-                             root directory. Default: %Binit.zsh%b, if a non-empty %Bfunctions%b sub-
-                             directory exists, else the largest of the files matching the glob
-                             %B(init.zsh|%b<name>%B.(zsh|plugin.zsh|zsh-theme|sh))%b, if any.
-                             <name> in the glob is resolved to the last component of the mod-
-                             ule name, or the last component of the path to the module root.
-  %B-c%b|%B--cmd%b <command>         Will execute specified command. Occurrences of the %B{}%b placeholder
-                             in the command are substituted by the module root directory path.
-                             I.e., %B-s 'foo.zsh'%b and %B-c 'source {}/foo.zsh'%b are equivalent.
-
-  Setting any per-call initialization option above will disable the default values from the
-  other per-call initialization options, so only your provided values will be used. I.e. these
-  values are either all automatic, or all manual in each zmodule call. To use default values
-  and also provided values, use separate zmodule calls."
-  if [[ ${${funcfiletrace[1]%:*}:A} != ${ztarget:A} ]]; then
-    print -u2 -PlR "%F{red}${0}: Must be called from %B${ztarget}%b%f" '' ${zusage}
-    return 2
-  fi
-  if (( ! # )); then
-    print -u2 -PlR "%F{red}<%= error %>${funcfiletrace[1]}: Missing zmodule url%f" '' ${zusage}
-    _zfailed=1
-    return 2
-  fi
-  local zurl=${1} zname=${1:t} zroot zarg
-  local -a zfpaths zfunctions zcmds
-  if [[ ${zurl} =~ ^[^:/]+: ]]; then
-    zname=${zname%.git}
-  elif [[ ${zurl} != /* ]]; then
-    # Count number of slashes
-    case ${#zurl//[^\/]/} in
-      0) zurl=https://github.com/zimfw/${zurl}.git ;;
-      1) zurl=https://github.com/${zurl}.git ;;
-    esac
-  fi
-  shift
-  while [[ ${1} == (-n|--name|-r|--root) ]]; do
-    if (( # < 2 )); then
-      print -u2 -PlR "%F{red}<%= error %>${funcfiletrace[1]}:%B${zname}:%b Missing argument for zmodule option %B${1}%b%f" '' ${zusage}
-      _zfailed=1
-      return 2
-    fi
-    case ${1} in
-      -n|--name)
-        shift
-        zname=${${1%%/##}##/##}
-        ;;
-      -r|--root)
-        shift
-        zroot=${${1%%/##}##/##}
-        ;;
-    esac
-    shift
-  done
-  if [[ ${zurl} == /* ]]; then
-    _zdirs[${zname}]=${zurl%%/##}
-    zurl=
-  else
-    _zdirs[${zname}]=${ZIM_HOME}/modules/${zname}
-  fi
-  if [[ ${+_zurls[${zname}]} -ne 0 && ${_zurls[${zname}]} != ${zurl} ]]; then
-    print -u2 -PlR "%F{red}<%= error %>${funcfiletrace[1]}:%B${zname}:%b Module already defined with a different URL. Expected %B${_zurls[${zname}]}%b%f" '' ${zusage}
-    _zfailed=1
-    return 2
-  fi
-  _zurls[${zname}]=${zurl}
-  local -r zroot_dir=${_zdirs[${zname}]}${zroot:+/${zroot}}
-  _zroot_dirs+=(${zroot_dir})
-  # Set default values
-  if (( ! ${+_ztools[${zname}]} )); then
-    zstyle -s ':zim:zmodule' use "_ztools[${zname}]" || _ztools[${zname}]=git
-  fi
-  if (( ! ${+_ztypes[${zname}]} )) _ztypes[${zname}]=branch
-  if (( ! ${+_zsubmodules[${zname}]} )) _zsubmodules[${zname}]=1
-  # Set values from options
-  while (( # > 0 )); do
-    case ${1} in
-      -b|--branch|-t|--tag|-u|--use|--on-pull|--if|-f|--fpath|-a|--autoload|-s|--source|-c|--cmd)
-        if (( # < 2 )); then
-          print -u2 -PlR "%F{red}<%= error %>${funcfiletrace[1]}:%B${zname}:%b Missing argument for zmodule option %B${1}%b%f" '' ${zusage}
-          _zfailed=1
-          return 2
-        fi
-        ;;
-    esac
-    case ${1} in
-      -b|--branch|-t|--tag|-u|--use|--no-submodules)
-        if [[ -z ${zurl} ]] _zimfw_print -u2 -PR "%F{yellow}<%= warn %>${funcfiletrace[1]}:%B${zname}:%b The zmodule option %B${1}%b has no effect for external modules%f"
-        ;;
-    esac
-    case ${1} in
-      -b|--branch)
-        shift
-        _ztypes[${zname}]=branch
-        _zrevs[${zname}]=${1}
-        ;;
-      -t|--tag)
-        shift
-        _ztypes[${zname}]=tag
-        _zrevs[${zname}]=${1}
-        ;;
-      -u|--use)
-        shift
-        _ztools[${zname}]=${1}
-        ;;
-      --no-submodules) _zsubmodules[${zname}]=0 ;;
-      -z|--frozen) _zfrozens[${zname}]=1 ;;
-      --on-pull)
-        shift
-        zarg=${1}
-        if [[ -n ${zroot} ]] zarg="(builtin cd -q ${zroot}; ${zarg})"
-        _zonpulls[${zname}]="${_zonpulls[${zname}]+${_zonpulls[${zname}]}; }${zarg}"
-        ;;
-      --if)
-        shift
-        _zifs[${zroot_dir}]=${1}
-        ;;
-      -f|--fpath)
-        shift
-        zarg=${1}
-        if [[ ${zarg} != /* ]] zarg=${zroot_dir}/${zarg}
-        zfpaths+=(${zarg})
-        ;;
-      -a|--autoload)
-        shift
-        zfunctions+=(${1})
-        ;;
-      -s|--source)
-        shift
-        zarg=${1}
-        if [[ ${zarg} != /* ]] zarg=${zroot_dir}/${zarg}
-        zcmds+=("source ${(q-)zarg:a}")
-        ;;
-      -c|--cmd)
-        shift
-        zcmds+=(${1//{}/${(q-)zroot_dir:a}})
-        ;;
-      -d|--disabled) _zdisabled_root_dirs+=(${zroot_dir}) ;;
-      *)
-        print -u2 -PlR "%F{red}<%= error %>${funcfiletrace[1]}:%B${zname}:%b Unknown zmodule option %B${1}%b%f" '' ${zusage}
-        _zfailed=1
-        return 2
-        ;;
-    esac
-    shift
-  done
-  if (( _zflags & 1 )); then
-    _znames+=(${zname})
-  fi
-  if (( _zflags & 2 )); then
-    if [[ ! -e ${zroot_dir} ]]; then
-      print -u2 -PR "%F{red}<%= error %>${funcfiletrace[1]}:%B${zname}: ${zroot_dir}%b not found%f"
-      _zfailed=1
-      return 1
-    fi
-    if (( ! ${#zfpaths} && ! ${#zfunctions} && ! ${#zcmds} )); then
-      zfpaths=(${zroot_dir}/functions(NF))
-      # _* functions are autoloaded by compinit
-      # prompt_*_setup functions are autoloaded by promptinit
-      zfunctions=(${^zfpaths}/^(*~|*.zwc(|.old)|_*|prompt_*_setup)(N-.:t))
-      local -ra prezto_scripts=(${zroot_dir}/init.zsh(N))
-      if (( ${#zfpaths} && ${#prezto_scripts} )); then
-        # this follows the prezto module format, no need to check for other scripts
-        zcmds=('source '${(q-)^prezto_scripts:a})
-      else
-        # get script with largest size (descending `O`rder by `L`ength, and return only `[1]` first)
-        local -ra zscripts=(${zroot_dir}/(init.zsh|(${zname:t}|${zroot_dir:t}).(zsh|plugin.zsh|zsh-theme|sh))(NOL[1]))
-        zcmds=('source '${(q-)^zscripts:a})
-      fi
-    fi
-    if (( ! ${#zfpaths} && ! ${#zfunctions} && ! ${#zcmds} )); then
-      _zimfw_print -u2 -PlR "%F{yellow}<%= warn %>${funcfiletrace[1]}:%B${zname}:%b Nothing found to be initialized. Customize the module name, root or initialization with %Bzmodule%b options.%f" '' ${zusage}
-    fi
-    # Prefix is added to all _zfpaths, _zfunctions and _zcmds to distinguish the originating root dir
-    local -r zpre=${zroot_dir}$'\0'
-    _zfpaths+=(${zpre}${^zfpaths})
-    _zfunctions+=(${zpre}${^zfunctions})
-    _zcmds+=(${zpre}${^zcmds})
-  fi
-}
--- a/src/stage2/31_zimfw_source_zimrc.zsh.erb
+++ b/src/stage2/31_zimfw_source_zimrc.zsh.erb
@ -1,20 +1,25 @@
 _zimfw_source_zimrc() {
-  local -r ztarget=${ZIM_CONFIG_FILE:-<%= home %>/.zimrc} _zflags=${1}
-  local -i _zfailed=0
-  if ! source ${ztarget} || (( _zfailed )); then
-    print -u2 -PR "%F{red}<%= failed %>Failed to source %B${ztarget}%b%f"
-    return 1
-  fi
-  if (( _zflags & 1 && ${#_znames} == 0 )); then
-    print -u2 -PR "%F{red}<%= failed %>No modules defined in %B${ztarget}%b%f"
-    return 1
-  fi
-  # Remove all from _zfpaths, _zfunctions and _zcmds with disabled root dirs prefixes
-  local zroot_dir zpre
-  for zroot_dir in ${_zdisabled_root_dirs}; do
-    zpre=${zroot_dir}$'\0'
-    _zfpaths=(${_zfpaths:#${zpre}*})
-    _zfunctions=(${_zfunctions:#${zpre}*})
-    _zcmds=(${_zcmds:#${zpre}*})
-  done
+<%= render_all("src/functions/*.erb") %>
+  {
+    local -r _zflags=${1}
+    local -i _zfailed=0
+    if ! source ${_zconfig} || (( _zfailed )); then
+      print -u2 -R "${_zred}Failed to source ${_zbold}${_zconfig}${_znormal}"
+      return 1
+    fi
+    if (( _zflags & 1 && ${#_znames} == 0 )); then
+      print -u2 -R "${_zred}No modules defined in ${_zbold}${_zconfig}${_znormal}"
+      return 1
+    fi
+    # Remove all from _zfpaths, _zfunctions and _zcmds with disabled root dirs prefixes
+    local zroot_dir zpre
+    for zroot_dir in ${_zdisabled_root_dirs}; do
+      zpre=${zroot_dir}$'\0'
+      _zfpaths=(${_zfpaths:#${zpre}*})
+      _zfunctions=(${_zfunctions:#${zpre}*})
+      _zcmds=(${_zcmds:#${zpre}*})
+    done
+  } always {
+    unfunction zmodule
+  }
 }
--- a/src/stage2/34_zimfw_list_unuseds.zsh.erb
+++ b/src/stage2/34_zimfw_list_unuseds.zsh.erb
@ -14,5 +14,5 @@ _zimfw_list_unuseds() {
  # Unused = all installed dirs not in zdirs
  _zunused_dirs=(${zinstalled:|zdirs})
  local zunused
-  for zunused (${_zunused_dirs}) _zimfw_print -PR "%B${zunused:t}:%b ${zunused}${1}"
+  for zunused (${_zunused_dirs}) _zimfw_print -R "${_zbold}${zunused:t}:${_znormal} ${zunused}${1}"
 }
--- a/src/stage2/50_zimfw_check_dumpfile.zsh.erb
+++ b/src/stage2/50_zimfw_check_dumpfile.zsh.erb
@ -1,3 +1,3 @@
 _zimfw_check_dumpfile() {
-  _zimfw_print -u2 -PR '%F{yellow}<%= warn %>Deprecated action. This is now handled by the completion module alone.'
+  _zimfw_print -u2 "${_zwarn}Deprecated action. This is now handled by the completion module alone.${_znormal}"
 }
--- a/src/stage2/50_zimfw_check_version.zsh.erb
+++ b/src/stage2/50_zimfw_check_version.zsh.erb
@ -1,24 +1,22 @@
 _zimfw_check_version() {
  if (( ${1} )); then
-    # Get latest version (get all `v*` tags from repo, delete `*v` from beginning,
-    # sort in descending `O`rder `n`umerically, and get the `[1]` first)
    if (( ${2} )); then
      # background check
      if [[ -w ${_zversion_target:h} ]]; then
-        print -R ${${(On)${(f)"$(GIT_HTTP_LOW_SPEED_LIMIT=1000 GIT_HTTP_LOW_SPEED_TIME=30 command git ls-remote --tags --refs \
+        print -R ${${${(f)"$(GIT_HTTP_LOW_SPEED_LIMIT=1000 GIT_HTTP_LOW_SPEED_TIME=30 command git ls-remote --tags --refs --sort=-v:refname \
            https://github.com/zimfw/zimfw.git 'v*' 2>/dev/null)"}##*v}[1]} >! ${_zversion_target} &!
      fi
    else
      # foreground check
      local tags
-      tags=$(command git ls-remote --tags --refs https://github.com/zimfw/zimfw.git 'v*') || return 1
-      >! ${_zversion_target} <<<${${(On)${(f)tags}##*v}[1]} || return 1
+      tags=$(command git ls-remote --tags --refs --sort=-v:refname https://github.com/zimfw/zimfw.git 'v*') || return 1
+      >! ${_zversion_target} <<<${${${(f)tags}##*v}[1]} || return 1
    fi
  fi
  if [[ -f ${_zversion_target} ]]; then
    local -r zlatest_version=$(<${_zversion_target})
    if [[ -n ${zlatest_version} && ${_zversion} != ${zlatest_version} ]]; then
-      _zimfw_print -u2 -PR "%F{yellow}Latest zimfw version is %B${zlatest_version}%b. You're using version %B${_zversion}%b. Run %Bzimfw upgrade%b to upgrade.%f"
+      _zimfw_print -u2 -R "${_zyellow}Latest zimfw version is ${_zbold}${zlatest_version}${_znormalyellow}. You're using version ${_zbold}${_zversion}${_znormalyellow}. Run ${_zbold}zimfw upgrade${_znormalyellow} to upgrade.${_znormal}"
      return 4
    fi
  fi
--- a/src/stage2/50_zimfw_clean_compiled.zsh.erb
+++ b/src/stage2/50_zimfw_clean_compiled.zsh.erb
@ -4,5 +4,5 @@ _zimfw_clean_compiled() {
  local zopt
  if (( _zprintlevel > 0 )) zopt=-v
  command rm -f ${zopt} ${^zscriptdirs}/**/*.zwc(|.old)(N) && \
-      _zimfw_print -P '<%= done %>Done with clean-compiled. Restart your terminal or run %Bzimfw compile%b to re-compile.'
+      _zimfw_print "Done with clean-compiled. Restart your terminal or run ${_zbold}zimfw compile${_znormal} to re-compile."
 }
--- a/src/stage2/50_zimfw_clean_dumpfile.zsh.erb
+++ b/src/stage2/50_zimfw_clean_dumpfile.zsh.erb
@ -3,5 +3,5 @@ _zimfw_clean_dumpfile() {
  zstyle -s ':zim:completion' dumpfile 'zdumpfile' || zdumpfile=<%= home %>/.zcompdump
  if (( _zprintlevel > 0 )) zopt=-v
  command rm -f ${zopt} ${zdumpfile}(|.dat|.zwc(|.old))(N) && \
-      _zimfw_print -P "<%= done %>Done with clean-dumpfile.${_zrestartmsg}"
+      _zimfw_print -R "Done with clean-dumpfile.${_zrestartmsg}"
 }
--- a/src/stage2/50_zimfw_compile.zsh.erb
+++ b/src/stage2/50_zimfw_compile.zsh.erb
@ -1,16 +1,16 @@
 _zimfw_compile() {
-  # Compile Zim scripts
+  # Compile zimfw scripts
  local zroot_dir zfile
  for zroot_dir in ${_zroot_dirs:|_zdisabled_root_dirs}; do
    if [[ ! -w ${zroot_dir} ]]; then
-      _zimfw_print -PR "%F{yellow}<%= warn %>%B${zroot_dir}:%b No write permission, unable to compile.%f"
+      _zimfw_print -R "${_zwarn}${_zbold}${zroot_dir}:${_znormalyellow} No write permission, unable to compile.${_znormal}"
      continue
    fi
    for zfile in ${zroot_dir}/(^*test*/)#*.zsh(|-theme)(N-.); do
      if [[ ! ${zfile}.zwc -nt ${zfile} ]]; then
-        zcompile -UR ${zfile} && _zimfw_print -PR "<%= okay %>%B${zfile}.zwc:%b Compiled"
+        zcompile -UR ${zfile} && _zimfw_print -R "${_zokay}${_zbold}${zfile}.zwc:${_znormal} Compiled"
      fi
    done
  done
-  _zimfw_print -P '<%= done %>Done with compile.'
+  _zimfw_print 'Done with compile.'
 }
--- a/src/stage2/50_zimfw_info.zsh.erb
+++ b/src/stage2/50_zimfw_info.zsh.erb
@ -1,7 +1,10 @@
 _zimfw_info() {
+  _zimfw_info_print_symlink 'zimfw config' ${_zconfig}
+  _zimfw_info_print_symlink ZIM_HOME ${ZIM_HOME}
+  _zimfw_info_print_symlink 'zimfw script' ${__ZIMFW_FILE}
  print -R 'zimfw version:        '${_zversion}' (built at <%= Time.now.utc %>, previous commit is <%= `git rev-parse --short HEAD | tr -d '\r\n'` %>)'
  local zparam
-  for zparam in LANG ${(Mk)parameters:#LC_*} OSTYPE TERM TERM_PROGRAM TERM_PROGRAM_VERSION ZIM_HOME ZSH_VERSION; do
+  for zparam in LANG ${(Mk)parameters:#LC_*} OSTYPE TERM TERM_PROGRAM TERM_PROGRAM_VERSION ZSH_VERSION; do
    print -R ${(r.22....:.)zparam}${(P)zparam}
  done
 }
--- a/src/stage2/50_zimfw_info_print_symlink.zsh.erb
+++ b/src/stage2/50_zimfw_info_print_symlink.zsh.erb
@ -0,0 +1,5 @@
+_zimfw_info_print_symlink() {
+  print -Rn ${(r.22....:.)1}${2}
+  if [[ -L ${2} ]] print -Rn ' -> '${2:A}
+  print
+}
--- a/src/stage2/50_zimfw_uninstall.zsh.erb
+++ b/src/stage2/50_zimfw_uninstall.zsh.erb
@ -1,11 +1,17 @@
 _zimfw_uninstall() {
-  local zopt
-  if (( _zprintlevel > 0 )) zopt=-v
-  if (( ${#_zunused_dirs} )); then
-    if (( _zprintlevel <= 0 )) || read -q "?Uninstall ${#_zunused_dirs} module(s) listed above [y/N]? "; then
-      _zimfw_print
-      command rm -rf ${zopt} ${_zunused_dirs} || return 1
-    fi
+  if (( _zprintlevel <= 0 )); then
+    command rm -rf ${_zunused_dirs} || return 1
+  else
+    local zunused_dir
+    print "Found ${_zbold}${#_zunused_dirs}${_znormal} unused module(s)."
+    for zunused_dir in ${_zunused_dirs}; do
+      if read -q "?Uninstall ${zunused_dir} [y/N]? "; then
+        print
+        command rm -rfv ${zunused_dir} || return 1
+      else
+        print
+      fi
+    done
+    print 'Done with uninstall.'
  fi
-  _zimfw_print -P '<%= done %>Done with uninstall.'
 }
--- a/src/stage2/50_zimfw_upgrade.zsh.erb
+++ b/src/stage2/50_zimfw_upgrade.zsh.erb
@ -1,5 +1,9 @@
 _zimfw_upgrade() {
-  local -r ztarget=${ZIM_HOME}/zimfw.zsh zurl=https://github.com/zimfw/zimfw/releases/latest/download/zimfw.zsh.gz
+  local -r ztarget=${__ZIMFW_FILE:A} zurl=https://github.com/zimfw/zimfw/releases/latest/download/zimfw.zsh.gz
+  if [[ ! -w ${ztarget:h} ]]; then
+    print -u2 -R "${_zred}No write permission to ${_zbold}${ztarget:h}${_znormalred}. Will not try to upgrade.${_znormal}"
+    return 1
+  fi
  {
    if (( ${+commands[curl]} )); then
      command curl -fsSL -o ${ztarget}.new.gz ${zurl} || return 1
@ -8,7 +12,7 @@ _zimfw_upgrade() {
      if (( _zprintlevel <= 1 )) zopt=-q
      if ! command wget -nv ${zopt} -O ${ztarget}.new.gz ${zurl}; then
        if (( _zprintlevel <= 1 )); then
-          print -u2 -PR "%F{red}<%= failed %>Failed to download %B${zurl}%b. Use %B-v%b option to see details.%f"
+          print -u2 -R "${_zred}Failed to download ${_zbold}${zurl}${_znormalred}. Use ${_zbold}-v${_znormalred} option to see details.${_znormal}"
        fi
        return 1
      fi
@ -17,7 +21,7 @@ _zimfw_upgrade() {
    # .latest_version can be outdated and will yield a false warning if zimfw is
    # upgraded before .latest_version is refreshed. Bad thing about having a cache.
    _zimfw_mv ${ztarget}{.new,} && command rm -f ${ZIM_HOME}/.latest_version && \
-        _zimfw_print -P '<%= done %>Done with upgrade.'
+        _zimfw_print 'Done with upgrade.'
  } always {
    command rm -f ${ztarget}.new{,.gz}
  }
--- a/src/stage2/69_zimfw_run_list.zsh.erb
+++ b/src/stage2/69_zimfw_run_list.zsh.erb
@ -1,22 +1,26 @@
 _zimfw_run_list() {
  local -r zname=${1}
  local -r zdir=${_zdirs[${zname}]}
-  print -PnR "%B${zname}:%b ${zdir}"
+  print -nR "${_zbold}${zname}:${_znormal} ${zdir}"
  if [[ -z ${_zurls[${zname}]} ]] print -n ' (external)'
  if (( ${_zfrozens[${zname}]} )) print -n ' (frozen)'
  if (( ${_zdisabled_root_dirs[(I)${zdir}]} )) print -n ' (disabled)'
  print
  if (( _zprintlevel > 1 )); then
    if [[ ${_zfrozens[${zname}]} -eq 0 && -n ${_zurls[${zname}]} ]]; then
-      print -nR "  From: ${_zurls[${zname}]}, "
-      if [[ -z ${_zrevs[${zname}]} ]]; then
-        print -n 'default branch'
+      if [[ ${_ztools[${zname}]} == mkdir ]]; then
+        print '  From: mkdir'
      else
-        print -nR "${_ztypes[${zname}]} ${_zrevs[${zname}]}"
+        print -nR "  From: ${_zurls[${zname}]}, "
+        if [[ -z ${_zrevs[${zname}]} ]]; then
+          print -n 'default branch'
+        else
+          print -nR "${_ztypes[${zname}]} ${_zrevs[${zname}]}"
+        fi
+        print -nR ", using ${_ztools[${zname}]}"
+        if (( ! _zsubmodules[${zname}] )) print -n ', no git submodules'
+        print
      fi
-      print -nR ", using ${_ztools[${zname}]}"
-      if (( ! _zsubmodules[${zname}] )) print -n ', no git submodules'
-      print
      if [[ -n ${_zonpulls[${zname}]} ]] print -R "  On-pull: ${_zonpulls[${zname}]}"
    fi
    # Match the current module dir prefix from _zroot_dirs
--- a/src/stage2/70_zimfw_create_dir.zsh.erb
+++ b/src/stage2/70_zimfw_create_dir.zsh.erb
@ -0,0 +1,6 @@
+_zimfw_create_dir() {
+  if ! ERR=$(command mkdir -p ${1} 2>&1); then
+    _zimfw_print_error "Error creating ${1}" ${ERR}
+    return 1
+  fi
+}
--- a/src/stage2/70_zimfw_print_error.zsh.erb
+++ b/src/stage2/70_zimfw_print_error.zsh.erb
@ -1,3 +1,3 @@
 _zimfw_print_error() {
-  print -u2 -PlR <%= clear_line %>"%F{red}<%= error %>%B${_zname}:%b ${1}%f" ${2:+${(F):-  ${(f)^2}}}
+  print -u2 -lR $'<%= clear_line %>'"${_zerror}${_zbold}${_zname}:${_znormalred} ${1}${_znormal}" ${2:+${(F):-  ${(f)^2}}}
 }
--- a/src/stage2/70_zimfw_print_okay.zsh.erb
+++ b/src/stage2/70_zimfw_print_okay.zsh.erb
@ -1,3 +1,3 @@
 _zimfw_print_okay() {
-  if (( _zprintlevel > ${2:-0} )) print -PlR <%= clear_line %>"<%= okay %>%B${_zname}:%b ${1}" ${3:+${(F):-  ${(f)^3}}}
+  if (( _zprintlevel > ${2:-0} )) print -lR $'<%= clear_line %>'"${_zokay}${_zbold}${_zname}:${_znormal} ${1}" ${3:+${(F):-  ${(f)^3}}}
 }
--- a/src/stage2/70_zimfw_print_warn.zsh.erb
+++ b/src/stage2/70_zimfw_print_warn.zsh.erb
@ -0,0 +1,3 @@
+_zimfw_print_warn() {
+  _zimfw_print -u2 -R $'<%= clear_line %>'"${_zwarn}${_zbold}${_zname}:${_znormalyellow} ${1}${_znormal}"
+}
--- a/src/stage2/75_zimfw_tool_degit.zsh.erb
+++ b/src/stage2/75_zimfw_tool_degit.zsh.erb
@ -4,22 +4,16 @@ _zimfw_download_tarball() {
    readonly REPO=${match[4]%.git}
  fi
  if [[ ${HOST} != github.com || -z ${REPO} ]]; then
-    _zimfw_print_error "${URL} is not a valid GitHub URL. Will not try to ${_zaction}."
+    _zimfw_print_error "${URL} is not a valid URL. Will not try to ${ACTION}. The zimfw degit tool only supports GitHub URLs. Use zmodule option ${_zbold}--use git${_znormalred} to use git instead."
    return 1
  fi
  readonly HEADERS_TARGET=${DIR}/${TEMP}_headers
  {
-    if [[ -r ${INFO_TARGET} ]]; then
-      readonly INFO=("${(@f)"$(<${INFO_TARGET})"}")
-      if [[ ${URL} != ${INFO[1]} ]]; then
-        _zimfw_print_error "URL does not match. Expected ${URL}. Will not try to ${_zaction}."
-        return 1
-      fi
-      # Previous REV is in line 2, reserved for future use.
-      readonly INFO_HEADER=${INFO[3]}
-    fi
+    readonly INFO=("${(@f)"$(<${INFO_TARGET})"}")
+    # Previous REV is in line 2, reserved for future use.
+    readonly INFO_HEADER=${INFO[3]}
    readonly TARBALL_URL=https://api.github.com/repos/${REPO}/tarball/${REV}
-    if [[ ${_zaction} == check ]]; then
+    if [[ ${ACTION} == check ]]; then
      if [[ -z ${INFO_HEADER} ]] return 0
      if (( ${+commands[curl]} )); then
        command curl -IfsL -H ${INFO_HEADER} ${TARBALL_URL} >${HEADERS_TARGET}
@ -57,7 +51,7 @@ _zimfw_download_tarball() {
      _zimfw_print_error "Error downloading ${TARBALL_URL}, no ETag header found in response"
      return 1
    fi
-    if [[ ${_zaction} == check ]]; then
+    if [[ ${ACTION} == check ]]; then
      command touch ${TARBALL_TARGET} # Update available
    else
      if ! print -lR "${URL}" "${REV}" "If-None-Match: ${ETAG}" >! ${INFO_TARGET} 2>/dev/null; then
@ -71,25 +65,41 @@ _zimfw_download_tarball() {
 }

 _zimfw_untar_tarball() {
-  if ! ERR=$(command tar -C ${1} --strip=1 -xzf ${TARBALL_TARGET} 2>&1); then
+  if ! ERR=$(command tar -C ${1} -xzf ${TARBALL_TARGET} 2>&1); then
    _zimfw_print_error "Error extracting ${TARBALL_TARGET}" ${ERR}
    return 1
  fi
-}
-
-_zimfw_create_dir() {
-  if ! ERR=$(command mkdir -p ${1} 2>&1); then
-    _zimfw_print_error "Error creating ${1}" ${ERR}
-    return 1
-  fi
+  local zsubdir
+  for zsubdir in ${1}/*(/); do
+    if ! ERR=$(command mv -f ${zsubdir}/*(DN) ${1} 2>&1 && command rmdir ${zsubdir} 2>&1); then
+      _zimfw_print_error "Error moving ${zsubdir}" ${ERR}
+      return 1
+    fi
+  done
 }

 _zimfw_tool_degit() {
  # This runs in a subshell
-  readonly -i SUBMODULES=${5}
-  readonly DIR=${1} URL=${2} REV=${4} ONPULL=${6} TEMP=.zdegit_${sysparams[pid]}
+  readonly -i SUBMODULES=${6}
+  readonly ACTION=${1} DIR=${2} URL=${3} REV=${5} ONPULL=${7} TEMP=.zdegit_${sysparams[pid]}_${RANDOM}
  readonly TARBALL_TARGET=${DIR}/${TEMP}_tarball.tar.gz INFO_TARGET=${DIR}/.zdegit
-  case ${_zaction} in
+  case ${ACTION} in
+    pre|prereinstall)
+      local premsg
+      if [[ ${ACTION} == pre ]] premsg=" Use zmodule option ${_zbold}-z${_znormalred}|${_zbold}--frozen${_znormalred} to disable this error or run ${_zbold}zimfw reinstall${_znormalred} to reinstall."
+      if [[ -e ${DIR} ]]; then
+        if [[ ! -r ${INFO_TARGET} ]]; then
+          _zimfw_print_error $'Module was not installed using zimfw\'s degit.'${premsg}
+          return 1
+        fi
+        readonly INFO=("${(@f)"$(<${INFO_TARGET})"}")
+        if [[ ${URL} != ${INFO[1]} ]]; then
+          _zimfw_print_error 'The zimfw degit URL does not match. Expected '${URL}.${premsg}
+          return 1
+        fi
+      fi
+      return 0
+      ;;
    install)
      {
        _zimfw_create_dir ${DIR} && _zimfw_download_tarball && _zimfw_untar_tarball ${DIR} && _zimfw_pull_print_okay Installed || return 1
@ -101,14 +111,10 @@ _zimfw_tool_degit() {
      }
      ;;
    check|update)
-      if [[ ! -r ${INFO_TARGET} ]]; then
-        _zimfw_print -u2 -PR <%= clear_line %>"%F{yellow}<%= warn %>%B${_zname}:%b Module was not installed using Zim's degit. Will not try to ${_zaction}. Use zmodule option %B-z%b|%B--frozen%b to disable this warning.%f"
-        return 0
-      fi
      readonly DIR_NEW=${DIR}${TEMP}
      {
        _zimfw_download_tarball || return 1
-        if [[ ${_zaction} == check ]]; then
+        if [[ ${ACTION} == check ]]; then
          if [[ -e ${TARBALL_TARGET} ]]; then
            _zimfw_print_okay 'Update available'
            return 4
@ -139,7 +145,7 @@ _zimfw_tool_degit() {
      ;;
  esac
  # Check after successful install or update
-  if [[ ${_zprintlevel} -gt 0 && ${SUBMODULES} -ne 0 && -e ${DIR}/.gitmodules ]]; then
-    print -u2 -PR <%= clear_line %>"%F{yellow}<%= warn %>%B${_zname}:%b Module contains git submodules, which are not supported by Zim's degit. Use zmodule option %B--no-submodules%b to disable this warning.%f"
+  if [[ ${SUBMODULES} -ne 0 && -e ${DIR}/.gitmodules ]]; then
+    _zimfw_print_warn "Module contains git submodules, which are not supported by zimfw's degit. Use zmodule option ${_zbold}--no-submodules${_znormalyellow} to disable this warning."
  fi
 }
--- a/src/stage2/75_zimfw_tool_git.zsh.erb
+++ b/src/stage2/75_zimfw_tool_git.zsh.erb
@ -1,9 +1,23 @@
 _zimfw_tool_git() {
  # This runs in a subshell
-  readonly -i SUBMODULES=${5}
-  readonly  DIR=${1} URL=${2} TYPE=${3} ONPULL=${6}
-  REV=${4}
-  case ${_zaction} in
+  readonly -i SUBMODULES=${6}
+  readonly ACTION=${1} DIR=${2} URL=${3} TYPE=${4} ONPULL=${7}
+  REV=${5}
+  case ${ACTION} in
+    pre|prereinstall)
+      local premsg
+      if [[ ${ACTION} == pre ]] premsg=" Use zmodule option ${_zbold}-z${_znormalred}|${_zbold}--frozen${_znormalred} to disable this error or run ${_zbold}zimfw reinstall${_znormalred} to reinstall."
+      if [[ -e ${DIR} ]]; then
+        if [[ ! -r ${DIR}/.git ]]; then
+          _zimfw_print_error 'Module was not installed using git.'${premsg}
+          return 1
+        fi
+        if [[ ${URL} != $(command git -C ${DIR} config --get remote.origin.url) ]]; then
+          _zimfw_print_error 'The git URL does not match. Expected '${URL}.${premsg}
+          return 1
+        fi
+      fi
+      ;;
    install)
      if ERR=$(command git clone ${REV:+-b} ${REV} -q --config core.autocrlf=false ${${SUBMODULES:#0}:+--recursive} -- ${URL} ${DIR} 2>&1); then
        _zimfw_pull_print_okay Installed
@ -13,14 +27,6 @@ _zimfw_tool_git() {
      fi
      ;;
    check|update)
-      if [[ ! -r ${DIR}/.git ]]; then
-        _zimfw_print -u2 -PR <%= clear_line %>"%F{yellow}<%= warn %>%B${_zname}:%b Module was not installed using git. Will not try to ${_zaction}. Use zmodule option %B-z%b|%B--frozen%b to disable this warning.%f"
-        return 0
-      fi
-      if [[ ${URL} != $(command git -C ${DIR} config --get remote.origin.url) ]]; then
-        _zimfw_print_error "URL does not match. Expected ${URL}. Will not try to ${_zaction}."
-        return 1
-      fi
      if ! ERR=$(command git -C ${DIR} fetch -pqt origin 2>&1); then
        _zimfw_print_error 'Error during git fetch' ${ERR}
        return 1
@ -40,7 +46,7 @@ _zimfw_tool_git() {
          fi
        fi
        TO_REV=${REV}@{u}
-        if [[ ${_zaction} == check ]]; then
+        if [[ ${ACTION} == check ]]; then
          readonly -i BEHIND=$(command git -C ${DIR} rev-list --count ${REV}..${TO_REV} -- 2>/dev/null)
          if (( BEHIND )); then
            _zimfw_print_okay "Update available [behind ${BEHIND}]"
@ -52,7 +58,7 @@ _zimfw_tool_git() {
        fi
      else
        if [[ ${REV} == $(command git -C ${DIR} describe --tags --exact-match 2>/dev/null) ]]; then
-          if [[ ${_zaction} == check ]]; then
+          if [[ ${ACTION} == check ]]; then
            _zimfw_print_okay 'Already up to date' 1
            return 0
          else
@ -60,13 +66,17 @@ _zimfw_tool_git() {
            return ${?}
          fi
        fi
-        if [[ ${_zaction} == check ]]; then
+        if [[ ${ACTION} == check ]]; then
          _zimfw_print_okay 'Update available'
          return 4
        fi
        TO_REV=${REV}
      fi
-      LOG=$(command git -C ${DIR} log --graph --color --format='%C(yellow)%h%C(reset) %s %C(cyan)(%cr)%C(reset)' ..${TO_REV} -- 2>/dev/null)
+      if [[ -z ${NO_COLOR} ]]; then
+        LOG=$(command git -C ${DIR} log --graph --color --format='%C(yellow)%h%C(reset) %s %C(cyan)(%cr)%C(reset)' ..${TO_REV} -- 2>/dev/null)
+      else
+        LOG=$(command git -C ${DIR} log --graph --format='%h %s (%cr)' ..${TO_REV} -- 2>/dev/null)
+      fi
      if ! ERR=$(command git -C ${DIR} checkout -q ${REV} -- 2>&1); then
        _zimfw_print_error 'Error during git checkout' ${ERR}
        return 1
--- a/src/stage2/75_zimfw_tool_mkdir.zsh.erb
+++ b/src/stage2/75_zimfw_tool_mkdir.zsh.erb
@ -0,0 +1,15 @@
+_zimfw_tool_mkdir() {
+  # This runs in a subshell
+  readonly -i SUBMODULES=${6}
+  readonly ACTION=${1} DIR=${2} TYPE=${4} REV=${5} ONPULL=${7}
+  if [[ ${ACTION} == (pre|prereinstall|check) ]] return 0
+  if [[ -n ${REV} ]]; then
+    _zimfw_print_warn "The zmodule option ${_zbold}-${TYPE[1]}${_znormalyellow}|${_zbold}--${TYPE}${_znormalyellow} has no effect when using the mkdir tool"
+  fi
+  if (( ! SUBMODULES )); then
+    _zimfw_print_warn "The zmodule option ${_zbold}--no-submodules${_znormalyellow} has no effect when using the mkdir tool"
+  fi
+  if [[ ! -d ${DIR} || -n ${ONPULL} ]]; then
+    _zimfw_create_dir ${DIR} && _zimfw_pull_print_okay Created || return 1
+  fi
+}
--- a/src/stage2/77_zimfw_run_tool.zsh.erb
+++ b/src/stage2/77_zimfw_run_tool.zsh.erb
@ -1,5 +1,6 @@
 _zimfw_run_tool() {
-  local -r _zname=${1}
+  local zaction=${1}
+  local -r _zname=${2}
  if [[ -z ${_zurls[${_zname}]} ]]; then
    _zimfw_print_okay 'Skipping external module' 1
    return 0
@ -8,38 +9,60 @@ _zimfw_run_tool() {
    _zimfw_print_okay 'Skipping frozen module' 1
    return 0
  fi
-  case ${_zaction} in
+  local -r ztool=${_ztools[${_zname}]}
+  if [[ ${ztool} != (degit|git|mkdir) ]]; then
+    _zimfw_print_error "Unknown tool ${ztool}"
+    return 1
+  fi
+  set "${_zdirs[${_zname}]}" "${_zurls[${_zname}]}" "${_ztypes[${_zname}]}" "${_zrevs[${_zname}]}" "${_zsubmodules[${_zname}]}" "${_zonpulls[${_zname}]}"
+  if [[ ${zaction} == reinstall ]]; then
+    _zimfw_tool_${ztool} prereinstall "${@}" && return 0
+    if (( _zprintlevel > 0 )); then
+      if read -q "?Reinstall ${_zname} [y/N]? "; then
+        print
+      else
+        print
+        return 0
+      fi
+    fi
+    local -r zdir_new=.${_zdirs[${_zname}]}_${sysparams[pid]}_${RANDOM}
+    _zimfw_print -nR 'Reinstalling '${_zname}'<%= ellipsis %>'
+    {
+      _zimfw_tool_${ztool} install ${zdir_new} "${@:2}" || return 1
+      if ! ERR=$({ command rm -rf ${_zdirs[${_zname}]} && command mv -f ${zdir_new} ${_zdirs[${_zname}]} } 2>&1); then
+        _zimfw_print_error "Error updating ${_zdirs[${_zname}]}" ${ERR}
+        return 1
+      fi
+    } always {
+      command rm -rf ${zdir_new} 2>/dev/null
+    }
+    return 0
+  else
+    _zimfw_tool_${ztool} pre "${@}" || return 1
+  fi
+  case ${zaction} in
    install)
      if [[ -e ${_zdirs[${_zname}]} ]]; then
        _zimfw_print_okay 'Skipping already installed module' 1
        return 0
      fi
-      _zimfw_print -nR <%= clear_line %>"Installing ${_zname}<%= ellipsis %>"
+      _zimfw_print -nR $'<%= clear_line %>Installing '${_zname}'<%= ellipsis %>'
      ;;
    check|update)
      if [[ ! -d ${_zdirs[${_zname}]} ]]; then
-        _zimfw_print_error 'Not installed. Run %Bzimfw install%b to install.'
+        _zimfw_print_error "Not installed. Run ${_zbold}zimfw install${_znormalred} to install."
        return 1
      fi
-      if [[ ${_zaction} == check ]]; then
-        if (( _zprintlevel > 1 )) print -nR <%= clear_line %>"Checking ${_zname}<%= ellipsis %>"
+      if [[ ${zaction} == check ]]; then
+        if (( _zprintlevel > 1 )) print -nR $'<%= clear_line %>Checking '${_zname}'<%= ellipsis %>'
      else
-        _zimfw_print -nR <%= clear_line %>"Updating ${_zname}<%= ellipsis %>"
+        _zimfw_print -nR $'<%= clear_line %>Updating '${_zname}'<%= ellipsis %>'
      fi
      ;;
    *)
-      _zimfw_print_error "Unknown action ${_zaction}"
-      return 1
-      ;;
-  esac
-  local -r ztool=${_ztools[${_zname}]}
-  case ${ztool} in
-    degit|git)
-      _zimfw_tool_${ztool} "${_zdirs[${_zname}]}" "${_zurls[${_zname}]}" "${_ztypes[${_zname}]}" "${_zrevs[${_zname}]}" "${_zsubmodules[${_zname}]}" "${_zonpulls[${_zname}]}"
-      ;;
-    *)
-      _zimfw_print_error "Unknown tool ${ztool}"
+      _zimfw_print_error "Unknown action ${zaction}"
      return 1
      ;;
  esac
+  _zimfw_tool_${ztool} ${zaction} "${@}"
 }
--- a/src/stage2/78_zimfw_run_tool_action.zsh.erb
+++ b/src/stage2/78_zimfw_run_tool_action.zsh.erb
@ -1,5 +1,7 @@
 _zimfw_run_tool_action() {
-  local -r _zaction=${1}
-  _zimfw_source_zimrc 1 && zargs -n 1 -P 0 -- "${_znames[@]}" -- _zimfw_run_tool
+  local -i zmaxprocs=0
+  if [[ ${1} == reinstall ]] zmaxprocs=1
+  _zimfw_source_zimrc 1 || return 1
+  zargs -n 2 -P ${zmaxprocs} -- "${_znames[@]}" -- _zimfw_run_tool ${1}
  return 0
 }
--- a/src/stage2/80_zimfw.zsh.erb
+++ b/src/stage2/80_zimfw.zsh.erb
@ -1,57 +1,74 @@
 zimfw() {
  builtin emulate -L zsh -o EXTENDED_GLOB
-  local -r _zversion='<%= version %>' _zversion_target=${ZIM_HOME}/.latest_version zusage="Usage: %B${0}%b <action> [%B-q%b|%B-v%b]
+  if [[ -z ${NO_COLOR} ]]; then
+    local -r _znormal=$'\E[0m' _zbold=$'\E[1m' _zred=$'\E[31m' _znormalred=$'\E[0;31m' _zgreen=$'\E[32m' _zyellow=$'\E[33m' _znormalyellow=$'\E[0;33m'
+  else
+    local -r _znormal= _zbold= _zred= _znormalred= _zgreen= _zyellow= _znormalyellow=
+  fi
+  local -r _zerror="${_zred}<%= error %>" _zokay="${_zgreen}<%= okay %>${_znormal}" _zwarn="${_zyellow}<%= warn %>"
+  local -r _zconfig=${ZIM_CONFIG_FILE:-<%= home %>/.zimrc} _zversion='<%= version %>'
+  local -r zusage="Usage: ${_zbold}${0}${_znormal} <action> [${_zbold}-q${_znormal}|${_zbold}-v${_znormal}]

 Actions:
-  %Bbuild%b           Build %B${ZIM_HOME}/init.zsh%b and %B${ZIM_HOME}/login_init.zsh%b.
-                  Also does %Bcompile%b. Use %B-v%b to also see its output.
-  %Bclean%b           Clean all. Does both %Bclean-compiled%b and %Bclean-dumpfile%b.
-  %Bclean-compiled%b  Clean Zsh compiled files.
-  %Bclean-dumpfile%b  Clean completion dumpfile.
-  %Bcompile%b         Compile Zsh files.
-  %Bhelp%b            Print this help.
-  %Binfo%b            Print Zim and system info.
-  %Blist%b            List all modules currently defined in %B${ZIM_CONFIG_FILE:-<%= home %>/.zimrc}%b.
-                  Use %B-v%b to also see the modules details.
-  %Binit%b            Same as %Binstall%b, but with output tailored to be used at terminal startup.
-  %Binstall%b         Install new modules. Also does %Bbuild%b, %Bcompile%b. Use %B-v%b to also see their
+  ${_zbold}build${_znormal}           Build ${_zbold}${ZIM_HOME}/init.zsh${_znormal} and ${_zbold}${ZIM_HOME}/login_init.zsh${_znormal}.
+                  Also does ${_zbold}compile${_znormal}. Use ${_zbold}-v${_znormal} to also see its output.
+  ${_zbold}clean${_znormal}           Clean all. Does both ${_zbold}clean-compiled${_znormal} and ${_zbold}clean-dumpfile${_znormal}.
+  ${_zbold}clean-compiled${_znormal}  Clean Zsh compiled files.
+  ${_zbold}clean-dumpfile${_znormal}  Clean completion dumpfile.
+  ${_zbold}compile${_znormal}         Compile Zsh files.
+  ${_zbold}help${_znormal}            Print this help.
+  ${_zbold}info${_znormal}            Print zimfw and system info.
+  ${_zbold}list${_znormal}            List all modules currently defined in ${_zbold}${_zconfig}${_znormal}.
+                  Use ${_zbold}-v${_znormal} to also see the modules details.
+  ${_zbold}init${_znormal}            Same as ${_zbold}install${_znormal}, but with output tailored to be used at terminal startup.
+  ${_zbold}install${_znormal}         Install new modules. Also does ${_zbold}build${_znormal}, ${_zbold}compile${_znormal}. Use ${_zbold}-v${_znormal} to also see their
                  output, any on-pull output and skipped modules.
-  %Buninstall%b       Delete unused modules. Prompts for confirmation. Use %B-q%b for quiet uninstall.
-  %Bcheck%b           Check if updates for current modules are available. Use %B-v%b to also see
+  ${_zbold}reinstall${_znormal}       Reinstall modules that failed check. Prompts for confirmation. Use ${_zbold}-q${_znormal} for
+                  quiet reinstall. Also does ${_zbold}build${_znormal}, ${_zbold}compile${_znormal}. Use ${_zbold}-v${_znormal} to also see their output,
+                  any on-pull output and skipped modules.
+  ${_zbold}uninstall${_znormal}       Delete unused modules. Prompts for confirmation. Use ${_zbold}-q${_znormal} for quiet uninstall.
+  ${_zbold}check${_znormal}           Check if updates for current modules are available. Use ${_zbold}-v${_znormal} to also see
                  skipped and up to date modules.
-  %Bupdate%b          Update current modules. Also does %Bbuild%b, %Bcompile%b. Use %B-v%b to also see their
+  ${_zbold}update${_znormal}          Update current modules. Also does ${_zbold}build${_znormal}, ${_zbold}compile${_znormal}. Use ${_zbold}-v${_znormal} to also see their
                  output, any on-pull output and skipped modules.
-  %Bcheck-version%b   Check if a new version of zimfw is available.
-  %Bupgrade%b         Upgrade zimfw. Also does %Bcompile%b. Use %B-v%b to also see its output.
-  %Bversion%b         Print zimfw version.
+  ${_zbold}check-version${_znormal}   Check if a new version of zimfw is available.
+  ${_zbold}upgrade${_znormal}         Upgrade zimfw. Also does ${_zbold}compile${_znormal}. Use ${_zbold}-v${_znormal} to also see its output.
+  ${_zbold}version${_znormal}         Print zimfw version.

 Options:
-  %B-q%b              Quiet (yes to prompts and only outputs errors)
-  %B-v%b              Verbose (outputs more details)"
+  ${_zbold}-q${_znormal}              Quiet (yes to prompts and only outputs errors)
+  ${_zbold}-v${_znormal}              Verbose (outputs more details)"
  local -Ua _znames _zroot_dirs _zdisabled_root_dirs
  local -A _zfrozens _ztools _zdirs _zurls _ztypes _zrevs _zsubmodules _zonpulls _zifs
  local -a _zfpaths _zfunctions _zcmds _zunused_dirs
  local -i _zprintlevel=1
  if (( # > 2 )); then
-     print -u2 -PlR "%F{red}${0}: Too many options%f" '' ${zusage}
+     print -u2 -lR "${_zred}${0}: Too many options${_znormal}" '' ${zusage}
     return 2
  elif (( # > 1 )); then
    case ${2} in
      -q) _zprintlevel=0 ;;
      -v) _zprintlevel=2 ;;
      *)
-        print -u2 -PlR "%F{red}${0}: Unknown option ${2}%f" '' ${zusage}
+        print -u2 -lR "${_zred}${0}: Unknown option ${2}${_znormal}" '' ${zusage}
        return 2
        ;;
    esac
  fi

-  if ! zstyle -t ':zim' disable-version-check && [[ ${1} != check-version ]]; then
+  local -r _zversion_target=${ZIM_HOME}/.latest_version
+  if ! zstyle -t ':zim' disable-version-check && \
+      [[ ${1} != check-version && -w ${ZIM_HOME} && -w ${__ZIMFW_FILE:A:h} ]]
+  then
    # If .latest_version does not exist or was not modified in the last 30 days
    [[ -f ${_zversion_target}(#qNm-30) ]]; local -r zversion_check_force=${?}
    _zimfw_check_version ${zversion_check_force} 1
  fi

+  if [[ ! -w ${ZIM_HOME} && ${1} == (build|check|init|install|update|reinstall|check-version) ]]; then
+    print -u2 -R "${_zred}${0}: No write permission to ${_zbold}${ZIM_HOME}${_znormalred}. Will not try to ${1}.${_znormal}"
+    return 1
+  fi
  local _zrestartmsg=' Restart your terminal for changes to take effect.'
  case ${1} in
    build)
@ -60,11 +77,11 @@ Options:
      _zimfw_compile
      ;;
    check-dumpfile) _zimfw_check_dumpfile ;;
-    clean) _zimfw_source_zimrc 2 && _zimfw_clean_compiled && _zimfw_clean_dumpfile ;;
-    clean-compiled) _zimfw_source_zimrc 2 && _zimfw_clean_compiled ;;
+    clean) _zimfw_source_zimrc 0 && _zimfw_clean_compiled && _zimfw_clean_dumpfile ;;
+    clean-compiled) _zimfw_source_zimrc 0 && _zimfw_clean_compiled ;;
    clean-dumpfile) _zimfw_clean_dumpfile ;;
-    compile) _zimfw_source_zimrc 2 && _zimfw_compile ;;
-    help) print -PR ${zusage} ;;
+    compile) _zimfw_source_zimrc 0 && _zimfw_compile ;;
+    help) print -R ${zusage} ;;
    info) _zimfw_info ;;
    list)
      _zimfw_source_zimrc 3 && zargs -n 1 -- "${_znames[@]}" -- _zimfw_run_list && \
@ -74,31 +91,31 @@ Options:
      _zrestartmsg=
      _zimfw_run_tool_action ${1} || return 1
      (( _zprintlevel-- ))
-      _zimfw_print -PR "<%= done %>Done with ${1}." # Only printed in verbose mode
+      _zimfw_print -R "Done with ${1}." # Only printed in verbose mode
      ;;
    init)
      _zrestartmsg=
      _zimfw_run_tool_action install || return 1
      (( _zprintlevel-- ))
-      _zimfw_print -PR "<%= done %>Done with install." # Only printed in verbose mode
+      _zimfw_print 'Done with install.' # Only printed in verbose mode
      _zimfw_source_zimrc 2 && _zimfw_build && _zimfw_compile
      ;;
-    install|update)
+    install|update|reinstall)
      _zimfw_run_tool_action ${1} || return 1
-      _zimfw_print -PR "<%= done %>Done with ${1}.${_zrestartmsg}"
+      _zimfw_print -R "Done with ${1}.${_zrestartmsg}"
      (( _zprintlevel-- ))
      _zimfw_source_zimrc 2 && _zimfw_build && _zimfw_compile
      ;;
-    uninstall) _zimfw_source_zimrc 2 && _zimfw_list_unuseds && _zimfw_uninstall ;;
+    uninstall) _zimfw_source_zimrc 0 && _zimfw_list_unuseds && _zimfw_uninstall ;;
    check-version) _zimfw_check_version 1 ;;
    upgrade)
      _zimfw_upgrade || return 1
      (( _zprintlevel-- ))
-      _zimfw_source_zimrc 2 && _zimfw_compile
+      _zimfw_source_zimrc 0 && _zimfw_compile
      ;;
-    version) print -PR ${_zversion} ;;
+    version) print -R ${_zversion} ;;
    *)
-      print -u2 -PlR "%F{red}${0}: Unknown action ${1}%f" '' ${zusage}
+      print -u2 -lR "${_zred}${0}: Unknown action ${1}${_znormal}" '' ${zusage}
      return 2
      ;;
  esac
--- a/src/zimfw.zsh.erb
+++ b/src/zimfw.zsh.erb
@ -1,23 +1,21 @@
 <%
 class Zim
  attr_reader :version, :home, :min_zsh_version, :url_regex,
-      :clear_line, :ellipsis, :okay, :warn, :error, :done, :failed
+      :bold, :normal, :red, :normalred, :yellow, :normalyellow, :clear_line, :ellipsis, :okay, :warn, :error

  def initialize
-    @version = "1.12.0"
+    @version = "1.16.0-SNAPSHOT"
    @home = "${ZDOTDIR:-${HOME}}"
    @min_zsh_version = "5.2"
    # Matches {ssh,http,https,git}://{user@,}host/org/repo and {user@,}host:org/repo
    # but not file:///path/to/repo or /path/to/repo
    # ${match[3]} contains host, and ${match[4]} contains org/repo
    @url_regex = "^([^:@/]+://)?([^@]+@)?([^:/]+)[:/]([^/]+/[^/]+)/?$"
-    @clear_line = "$'\\E[2K\\r'"
+    @clear_line = "\\E[2K\\r"
    @ellipsis = " ..."
-    @okay = "%F{green})%f "
+    @okay = ") "
    @warn = "! "
    @error = "x "
-    @done = ""
-    @failed = ""
  end

  def render(filename)
@ -38,8 +36,4 @@ zim = Zim.new

 <%= zim.render_commented("LICENSE") %>
 <%= zim.render_all("src/stage2/*.erb") %>
-if [[ ${functrace[1]} == zmodule:* ]]; then
-  zmodule "${@}"
-else
-  zimfw "${@}"
-fi
+zimfw "${@}"
--- a/zimfw.zsh
+++ b/zimfw.zsh
Author	SHA1	Message	Date
Eric Nielsen	2d5718ef33	Update recommended path for zimfw.zsh in README.md	2024-11-06 19:39:43 -05:00
Eric Nielsen	99a4dc396a	Respect NO_COLOR environment variable See https://no-color.org/	2024-10-28 18:15:03 -05:00
Eric Nielsen	0392926d61	Nothing to do on check action for mkdir tool	2024-10-25 11:15:11 -05:00
Eric Nielsen	e8e26c1b13	Also output zimfw config and zimfw script paths in info action, following symlinks if any.	2024-10-10 09:17:22 -05:00
Eric Nielsen	84c59ede0e	v1.15.1	2024-10-09 19:28:54 -05:00
Eric Nielsen	331f1c5548	Preserve original module if reinstall fails instead of deleting it first. Also minor fix in mkdir tool which was not properly skipping the reinstall action.	2024-10-09 19:24:01 -05:00
Eric Nielsen	f4bc83da7e	v1.15.0	2024-10-08 18:42:34 -05:00
Eric Nielsen	4bb6172900	Add `--if-ostype` option to `zmodule`	2024-10-08 18:25:12 -05:00
Eric Nielsen	caa0c850ae	Add disclaimer comment to beginning of .zimrc Also remove unneeded check from zmodule, since now it can only be called from _zimfw_source_zimrc.	2024-10-07 09:29:08 -05:00
Eric Nielsen	92c3eede1f	Add reinstall action that removes and then installs again the modules that failed any of the "pre" checks. This runs the "pre" checks (as "prereinstall") and, if the checks failed (return code is not 0), then proceeds with the reinstall for each module. Also minor change of the use of the word "upgrade", reserving it to mean upgrading zimfw. Fixes #542	2024-10-07 08:52:41 -05:00
Eric Nielsen	869a8f5f17	Ask before uninstallng each unused module instead of asking just once for all. Keep printing number of unused modules, even if zero.	2024-09-16 18:30:09 -05:00
Eric Nielsen	3fe3ba2b48	Check degit URL in pre action as we also check the git URL in the pre action there. Don't use _zimfw_source_zimrc with a flag when no _znames is needed (flag 1) or _zfpaths, _zfunctions, _zcmds are needed (flag 2).	2024-09-16 18:06:12 -05:00
Eric Nielsen	ded640ed80	Hide git-related information in list for mkdir tool as that information has no effect for that tool.	2024-08-26 19:46:25 -05:00
Eric Nielsen	880ed131a1	Pre check module before running tool Check if module is correctly installed before running any other action on the module. See #542	2024-08-20 08:07:10 -05:00
Eric Nielsen	7f3491b1bb	Don't autoload zimfw if no config file exists instead of if no ${ZIM_HOME} exists. If current user has no config file, then most likely they're sourcing the init.zsh generated by another user in the same machine.	2024-08-16 23:46:32 -05:00
Eric Nielsen	6166fce1a1	v1.14.0	2024-06-25 12:32:13 -05:00
Eric Nielsen	3b7908dca1	Try to upgrade zimfw.zsh if it's a symlink Initially the idea was to not allow this so upgrades are disabled when the script is installed using a package manager, but this is an unnecessary complexity. Making it less smart and more predictable.	2024-06-25 09:08:10 -05:00
Eric Nielsen	0785d87ea4	Improve error messages and check ZIM_HOME for write permission. Also, if ZIM_HOME is not defined, don't "autoload" the zimfw function, since this is going to be a scenario where the user only has something like `source /path/to/zim/init.zsh` in their .zshrc.	2024-06-21 15:43:48 -05:00
Eric Nielsen	eb37844857	Disable background version check if no write access to zimfw.zsh or if it's a symlink or not a regular file. It does not make sense to show a message to user saying "Run zimfw upgrade to upgrade" if the action will then fail.	2024-06-18 17:40:12 -05:00
Eric Nielsen	3e812ed311	Don't upgrade zimfw.zsh if not in a writable path or if it's a symlink or not a regular file. This makes more sense now that zimfw.zsh can exist outside ZIM_HOME, that the same file can be used my multiple users in the same machine, and that it is going to be possible to install it with a package manager once it's stable to do so.	2024-06-18 17:13:53 -05:00
Eric Nielsen	897afc9cf9	Reapply "Use `${HOME}` in generated static init.zsh script" This reverts commit `9a47fde0c8`.	2024-06-17 07:29:19 -05:00
Eric Nielsen	76164d6217	Allow zimfw.zsh to exist outside ZIM_HOME and change initialization so ZIM_HOME is required before sourcing the script.	2024-06-14 20:17:07 -05:00
Eric Nielsen	9a47fde0c8	Revert "Use `${HOME}` in generated static init.zsh script" This reverts commit `06f8bc71a3`. This breaks allowing a machine to have just one init.zsh script that can be sourced by different users.	2024-06-10 07:52:45 -05:00
Eric Nielsen	06f8bc71a3	Use `${HOME}` in generated static init.zsh script Fixes #509	2024-06-09 11:32:08 -05:00
Eric Nielsen	9dc4056c4e	chmod a+r init.zsh so all users can read it This better allows a global instalation of Zim that can be sourced by other users in the same machine. See #486	2024-06-03 08:51:20 -05:00
Eric Nielsen	96f60da366	Improve zimfw's degit error message Hopefully make it clearer when either the git or the degit tool is being used. See #535	2024-05-30 09:38:44 -05:00
Eric Nielsen	cdd9258d5c	Don't expose the zmodule function outside zimfw Don't want to maintain extra code to allow zmodule to run outside zimfw. This has no added benefit and might confuse users. If you were calling zmodule in the shell just to get the help message, hopefully you can look that up in the documentation instead.	2024-05-30 09:21:16 -05:00
Eric Nielsen	4fcc85b2db	Update README.md with ZIM_CONFIG_FILE instructions Also add git-info and duration-info modules to the basic templates for a better user experience.	2024-05-26 12:44:49 -05:00
Eric Nielsen	4200e6cdb3	v1.13.1	2024-04-28 14:07:41 -05:00
Eric Nielsen	c86223f473	Don't use tar --strip as it's not compatible with BSD distributions. Fixes #534	2024-04-28 14:06:24 -05:00
Eric Nielsen	39d2087ad4	v1.13.0	2024-02-16 21:06:36 -05:00
Eric Nielsen	2e9256a567	Add new mkdir tool to generate empty modules This will allow creating modules that contain only externally generated files. For example, this is how I currently use it to generate modules for code that is supposed to be eval'ed: zmodule-eval() { local -r zcommand=${${=1}[1]} ztarget=${1//[^[:alnum:]]/-}.zsh zmodule custom-${zcommand} --use mkdir --if-command ${zcommand} \ --cmd "if [[ ! {}/${ztarget} -nt \${commands[${zcommand}]} ]]; then ${1} >! {}/${ztarget}; zcompile -UR {}/${ztarget}; fi" \ --source ${ztarget} } zmodule-eval 'starship init zsh' unfunction zmodule-eval	2024-02-16 20:41:29 -05:00
Eric Nielsen	8bec2f7549	Add `--if-command` option to `zmodule`	2024-01-22 21:36:17 -05:00
Eric Nielsen	5f649d3031	v1.12.1	2023-09-16 13:26:53 -05:00
Eric Nielsen	26151d2f54	Remove prompt expansion from print statements and replace the foreground color and bold expansions by ANSI escape codes. This should make the print calls now safe and no expansion at all should happen as we're using `-R` -- unless the `-e` flag is given. Fixes #521. Closes #522	2023-09-16 13:21:14 -05:00
Eric Nielsen	d33d632ec1	Use `--sort=-v:refname` in _zimfw_check_version to sort tags, instead of using Zsh's `(On)`. The tags will come sorted already.	2023-09-15 19:55:43 -05:00