Add a plugin mechanism \o/
This is a major change, where Zsh modules/plugins are not git submodules
in the Zim repo anymore, but customized and installed separately as
individual repositories. The discussion about this started more than 2
years ago in #88. Closes #299.
This will allow contributors' modules to live in their own repositories.
See #33, #138, #262, #281, #324.
The current code has what, up to this point, I considered to be the best
balance between simplicity, execution speed and number of files.
One measured decision was to make the initialization of modules depend
only on the `':zim' modules` style, keeping it as fast as possible.
The `':zim:module' module` style is used to install, update and clean
the modules, all operations that happen after the user got his
as-blazing-fast-possible shell prompt.
Even though I didn't care much about making install or update fast,
`xargs` has a nice feature of allowing commands to be executed in
parallel with `-P`. I took advantage of that.
I've also worked on making the `zimfw` utility give the user some nice
(while still minimalistic) output. Also I'm suggesting this as the new
name for the `zmanage` tool, since `zimfw` does not shadow the `zim`
wiki tool.
2019-01-07 18:25:34 -05:00
|
|
|
# This runs in a new shell
|
2019-01-22 19:40:43 -05:00
|
|
|
DIR=${1}
|
|
|
|
URL=${2}
|
Add a plugin mechanism \o/
This is a major change, where Zsh modules/plugins are not git submodules
in the Zim repo anymore, but customized and installed separately as
individual repositories. The discussion about this started more than 2
years ago in #88. Closes #299.
This will allow contributors' modules to live in their own repositories.
See #33, #138, #262, #281, #324.
The current code has what, up to this point, I considered to be the best
balance between simplicity, execution speed and number of files.
One measured decision was to make the initialization of modules depend
only on the `':zim' modules` style, keeping it as fast as possible.
The `':zim:module' module` style is used to install, update and clean
the modules, all operations that happen after the user got his
as-blazing-fast-possible shell prompt.
Even though I didn't care much about making install or update fast,
`xargs` has a nice feature of allowing commands to be executed in
parallel with `-P`. I took advantage of that.
I've also worked on making the `zimfw` utility give the user some nice
(while still minimalistic) output. Also I'm suggesting this as the new
name for the `zmanage` tool, since `zimfw` does not shadow the `zim`
wiki tool.
2019-01-07 18:25:34 -05:00
|
|
|
REV=${4}
|
|
|
|
OPT=${5}
|
|
|
|
MODULE=${DIR:t}
|
2019-01-22 19:40:43 -05:00
|
|
|
CLEAR_LINE="\033[2K\r"
|
Add a plugin mechanism \o/
This is a major change, where Zsh modules/plugins are not git submodules
in the Zim repo anymore, but customized and installed separately as
individual repositories. The discussion about this started more than 2
years ago in #88. Closes #299.
This will allow contributors' modules to live in their own repositories.
See #33, #138, #262, #281, #324.
The current code has what, up to this point, I considered to be the best
balance between simplicity, execution speed and number of files.
One measured decision was to make the initialization of modules depend
only on the `':zim' modules` style, keeping it as fast as possible.
The `':zim:module' module` style is used to install, update and clean
the modules, all operations that happen after the user got his
as-blazing-fast-possible shell prompt.
Even though I didn't care much about making install or update fast,
`xargs` has a nice feature of allowing commands to be executed in
parallel with `-P`. I took advantage of that.
I've also worked on making the `zimfw` utility give the user some nice
(while still minimalistic) output. Also I'm suggesting this as the new
name for the `zmanage` tool, since `zimfw` does not shadow the `zim`
wiki tool.
2019-01-07 18:25:34 -05:00
|
|
|
if [[ -e ${DIR} ]]; then
|
|
|
|
# Already exists
|
|
|
|
return 0
|
|
|
|
fi
|
2019-01-22 19:40:43 -05:00
|
|
|
[[ ${OPT} != -q ]] && print -n "${CLEAR_LINE}Installing ${MODULE} …"
|
Add a plugin mechanism \o/
This is a major change, where Zsh modules/plugins are not git submodules
in the Zim repo anymore, but customized and installed separately as
individual repositories. The discussion about this started more than 2
years ago in #88. Closes #299.
This will allow contributors' modules to live in their own repositories.
See #33, #138, #262, #281, #324.
The current code has what, up to this point, I considered to be the best
balance between simplicity, execution speed and number of files.
One measured decision was to make the initialization of modules depend
only on the `':zim' modules` style, keeping it as fast as possible.
The `':zim:module' module` style is used to install, update and clean
the modules, all operations that happen after the user got his
as-blazing-fast-possible shell prompt.
Even though I didn't care much about making install or update fast,
`xargs` has a nice feature of allowing commands to be executed in
parallel with `-P`. I took advantage of that.
I've also worked on making the `zimfw` utility give the user some nice
(while still minimalistic) output. Also I'm suggesting this as the new
name for the `zmanage` tool, since `zimfw` does not shadow the `zim`
wiki tool.
2019-01-07 18:25:34 -05:00
|
|
|
if ERR=$(command git clone -b ${REV} -q --recursive ${URL} ${DIR} 2>&1); then
|
|
|
|
if [[ ${OPT} != -q ]]; then
|
2019-01-22 19:40:43 -05:00
|
|
|
print -P "${CLEAR_LINE}%F{green}✓%f ${MODULE}: Installed"
|
Add a plugin mechanism \o/
This is a major change, where Zsh modules/plugins are not git submodules
in the Zim repo anymore, but customized and installed separately as
individual repositories. The discussion about this started more than 2
years ago in #88. Closes #299.
This will allow contributors' modules to live in their own repositories.
See #33, #138, #262, #281, #324.
The current code has what, up to this point, I considered to be the best
balance between simplicity, execution speed and number of files.
One measured decision was to make the initialization of modules depend
only on the `':zim' modules` style, keeping it as fast as possible.
The `':zim:module' module` style is used to install, update and clean
the modules, all operations that happen after the user got his
as-blazing-fast-possible shell prompt.
Even though I didn't care much about making install or update fast,
`xargs` has a nice feature of allowing commands to be executed in
parallel with `-P`. I took advantage of that.
I've also worked on making the `zimfw` utility give the user some nice
(while still minimalistic) output. Also I'm suggesting this as the new
name for the `zmanage` tool, since `zimfw` does not shadow the `zim`
wiki tool.
2019-01-07 18:25:34 -05:00
|
|
|
fi
|
|
|
|
else
|
2019-01-22 19:40:43 -05:00
|
|
|
print -P "${CLEAR_LINE}%F{red}✗ ${MODULE}: Error%f\n${ERR}"
|
Add a plugin mechanism \o/
This is a major change, where Zsh modules/plugins are not git submodules
in the Zim repo anymore, but customized and installed separately as
individual repositories. The discussion about this started more than 2
years ago in #88. Closes #299.
This will allow contributors' modules to live in their own repositories.
See #33, #138, #262, #281, #324.
The current code has what, up to this point, I considered to be the best
balance between simplicity, execution speed and number of files.
One measured decision was to make the initialization of modules depend
only on the `':zim' modules` style, keeping it as fast as possible.
The `':zim:module' module` style is used to install, update and clean
the modules, all operations that happen after the user got his
as-blazing-fast-possible shell prompt.
Even though I didn't care much about making install or update fast,
`xargs` has a nice feature of allowing commands to be executed in
parallel with `-P`. I took advantage of that.
I've also worked on making the `zimfw` utility give the user some nice
(while still minimalistic) output. Also I'm suggesting this as the new
name for the `zmanage` tool, since `zimfw` does not shadow the `zim`
wiki tool.
2019-01-07 18:25:34 -05:00
|
|
|
return 1
|
|
|
|
fi
|