ultimate-vim/vim_plugin_candinates_src/cscope-15.8a/doc/xcscope.1

'\" t
.\" The xcscope.el man page
.\" Origionally written by Darryl Okahata, Apr 2000
.\" 
.\" Converted to a man page July 20, 2004 by Neil Horman <nhorman@redhat.com>
.\"

.de EX
.sp
.nf
.ft CW
..
.de EE
.ft R
.fi
.sp
..

.TH XCSCOPE.EL "1" "April 2000" "Darryl Okahata"
.SH NAME
xcscope.el - xemacs cscope lisp support package
.SH DESCRIPTION
xcscope is a lisp package for use in integrating cscope 
functionality into xemacs
.SH INSTALLATION
.P
 Installation steps:

.P
 0. (It is, of course, assumed that cscope is already properly
    installed on the current system.)
.P
 1. Ensure that the location of cscope-indexer is located in your path

.P
 2. Ensure that the location of xcscope.el is in the xemacs module load path

.P
 3. Edit your ~/.emacs file to add the line:
.P
.BI      (require 'xcscope)

.P
5. If you intend to use xcscope.el often you can optionally edit your
~/.emacs file to add keybindings that reduce the number of keystrokes
required.  For example, the following will add "C-f#" keybindings,
which are easier to type than the usual "C-c s" prefixed keybindings.
Note that specifying "global-map" instead of "cscope:map" makes the
keybindings available in all buffers:
.EX
	(define-key global-map [(ctrl f3)]  'cscope-set-initial-directory)
	(define-key global-map [(ctrl f4)]  'cscope-unset-initial-directory)
	(define-key global-map [(ctrl f5)]  'cscope-find-this-symbol)
	(define-key global-map [(ctrl f6)]  'cscope-find-global-definition)
	(define-key global-map [(ctrl f7)]
		cscope-find-global-definition-no-prompting)
	(define-key global-map [(ctrl f8)]  'cscope-pop-mark)
	(define-key global-map [(ctrl f9)]  'cscope-next-symbol)
	(define-key global-map [(ctrl f10)] 'cscope-next-file)
	(define-key global-map [(ctrl f11)] 'cscope-prev-symbol)
	(define-key global-map [(ctrl f12)] 'cscope-prev-file)
	(define-key global-map [(meta f9)]  'cscope-display-buffer)
	(define-key global-map [(meta f10)] 'cscope-display-buffer-toggle)
.EE

.P
 6. Restart (X)Emacs.  That's it.


.SH USING THIS MODULE

.SS * Basic usage:

.P
 If all of your C/C++/lex/yacc source files are in the same
 directory, you can just start using this module.  If your files are
 spread out over multiple directories, see "Advanced usage", below.

.P
 Just edit a source file, and use the pull-down or pop-up (button 3)
 menus to select one of:

.EX
	Find symbol
	Find global definition
	Find called functions
	Find functions calling a function
	Find text string
	Find egrep pattern
	Find a file
	Find files #including a file
.EE

.P
The cscope database will be automatically created in the same directory 
as the source files (assuming that you've never used cscope before), and
a buffer will pop-up displaying the results.  You can then use button 2
(the middle button) on the mouse to edit the selected file, or you can
move the text cursor over a selection and press [Enter].

.P
Hopefully, the interface should be fairly intuitive.

.SS * Locating the cscope databases:

.P
This module will first use the variable, `cscope-database-regexps',
to search for a suitable database directory.  If a database location
cannot be found using this variable then a search is begun at the
variable, `cscope-initial-directory', if set, or the current
directory otherwise.  If the directory is not a cscope database
directory then the directory's parent, parent's parent, etc. is
searched until a cscope database directory is found, or the root
directory is reached.  If the root directory is reached, the current
directory will be used.

.P
A cscope database directory is one in which EITHER a cscope database
file (e.g., "cscope.out") OR a cscope file list (e.g.,
"cscope.files") exists.  If only "cscope.files" exists, the
corresponding "cscope.out" will be automatically created by cscope
when a search is done.  By default, the cscope database file is called
"cscope.out", but this can be changed (on a global basis) via the
variable, `cscope-database-file'.  There is limited support for cscope
databases that are named differently than that given by
`cscope-database-file', using the variable, `cscope-database-regexps'.

.P
Note that the variable, `cscope-database-regexps', is generally not
needed, as the normal hierarchical database search is sufficient
for placing and/or locating the cscope databases.  However, there
may be cases where it makes sense to place the cscope databases
away from where the source files are kept; in this case, this
variable is used to determine the mapping.  One use for this
variable is when you want to share the database file with other
users; in this case, the database may be located in a directory
separate from the source files.  

.P
Setting the variable, `cscope-initial-directory', is useful when a
search is to be expanded by specifying a cscope database directory
that is a parent of the directory that this module would otherwise
use.  For example, consider a project that contains the following
cscope database directories:

.EX
	/users/jdoe/sources
	/users/jdoe/sources/proj1
	/users/jdoe/sources/proj2
.EE

.P
If a search is initiated from a .c file in /users/jdoe/sources/proj1
then (assuming the variable, `cscope-database-regexps', is not set)
/users/jdoe/sources/proj1 will be used as the cscope data base directory.
Only matches in files in /users/jdoe/sources/proj1 will be found.  This
can be remedied by typing "C-c s a" and then "M-del" to remove single
path element in order to use a cscope database directory of
/users/jdoe/sources.  Normal searching can be restored by typing "C-c s A".



.SS * Keybindings:

.P
All keybindings use the "C-c s" prefix, but are usable only while
editing a source file, or in the cscope results buffer:

.TS
lb li.
C-c s s       Find symbol.
C-c s d       Find global definition.
C-c s g       Find global definition (alternate binding).
C-c s G       Find global definition without prompting.
C-c s c       Find functions calling a function.
C-c s C       Find called functions (list functions called
C-c s t       Find text string.
C-c s e       Find egrep pattern.
C-c s f       Find a file.
C-c s i       Find files #including a file.
.TE

These pertain to navigation through the search results:

.TS
lb li.
C-c s b       Display *cscope* buffer.
C-c s B       Auto display *cscope* buffer toggle.
C-c s n       Next symbol.
C-c s N       Next file.
C-c s p       Previous symbol.
C-c s P       Previous file.
C-c s u       Pop mark.
.TE

.P
These pertain to setting and unsetting the variable,
`cscope-initial-directory', (location searched for the cscope database
directory):

.TS
lb li.
C-c s a       Set initial directory.
C-c s A       Unset initial directory.
.TE

.P
These pertain to cscope database maintenance:

.TS
lb li.
C-c s L       Create list of files to index.
C-c s I       Create list and index.
C-c s E       Edit list of files to index.
C-c s W       T{
Locate this buffer's cscope directory.
.br
("W" -> "where")
T}
C-c s S       T{
Locate this buffer's cscope directory.
.br
("S" --> "show")
T}
C-c s T       T{
Locate this buffer's cscope directory.
("T" --> "tell")
T}
C-c s D       Dired this buffer's directory.
.TE

.SS * Advanced usage:

.P
If the source files are spread out over multiple directories,
you've got a few choices:

.P
[ NOTE: you will need to have the script, "cscope-indexer",
properly installed in order for the following to work.  ]

.P
1. If all of the directories exist below a common directory
(without any extraneous, unrelated subdirectories), you can tell
this module to place the cscope database into the top-level,
common directory.  This assumes that you do not have any cscope
databases in any of the subdirectories.  If you do, you should
delete them; otherwise, they will take precedence over the
top-level database.

.P
If you do have cscope databases in any subdirectory, the
following instructions may not work right.

.P
It's pretty easy to tell this module to use a top-level, common
directory:

.HP
a. Make sure that the menu pick, "Cscope/Index recursively", is
checked (the default value).

.HP
b. Select the menu pick, "Cscope/Create list and index", and
specify the top-level directory.  This will run the script,
"cscope-indexer", in the background, so you can do other
things if indexing takes a long time.  A list of files to
index will be created in "cscope.files", and the cscope
database will be created in "cscope.out".

.HP
Once this has been done, you can then use the menu picks
(described in "Basic usage", above) to search for symbols.

.HP
Note, however, that, if you add or delete source files, you'll
have to either rebuild the database using the above procedure,
or edit the file, "cscope.files" to add/delete the names of the
source files.  To edit this file, you can use the menu pick,
"Cscope/Edit list of files to index".

.P
2. If most of the files exist below a common directory, but a few
are outside, you can use the menu pick, "Cscope/Create list of
files to index", and specify the top-level directory.  Make sure
that "Cscope/Index recursively", is checked before you do so,
though.  You can then edit the list of files to index using the
menu pick, "Cscope/Edit list of files to index".  Just edit the
list to include any additional source files not already listed.

.P
Once you've created, edited, and saved the list, you can then
use the menu picks described under "Basic usage", above, to
search for symbols.  The first time you search, you will have to
wait a while for cscope to fully index the source files, though.
If you have a lot of source files, you may want to manually run
cscope to build the database:

.EX
     cd top-level-directory    # or wherever
     rm -f cscope.out          # not always necessary
     cscope -b
.EE

.P
 3. If the source files are scattered in many different, unrelated
    places, you'll have to manually create cscope.files and put a
    list of all pathnames into it.  Then build the database using:

.EX
     cd some-directory         # wherever cscope.files exists
     rm -f cscope.out          # not always necessary
     cscope -b
.EE

.P
Next, read the documentation for the variable,
"cscope-database-regexps", and set it appropriately, such that
the above-created cscope database will be referenced when you
edit a related source file.

.P
Once this has been done, you can then use the menu picks
described under "Basic usage", above, to search for symbols.

.SS * Interesting configuration variables:

.P
.B "cscope-truncate-lines"
.P
This is the value of `truncate-lines' to use in cscope
buffers; the default is the current setting of
`truncate-lines'.  This variable exists because it can be
easier to read cscope buffers with truncated lines, while
other buffers do not have truncated lines.

.P
.B "cscope-use-relative-paths"
.P
If non-nil, use relative paths when creating the list of files
to index.  The path is relative to the directory in which the
cscope database will be created.  If nil, absolute paths will
be used.  Absolute paths are good if you plan on moving the
database to some other directory (if you do so, you'll
probably also have to modify `cscope-database-regexps').
Absolute paths may also be good if you share the database file
with other users (you'll probably want to specify some
automounted network path for this).

.P
.B "cscope-index-recursively"
.P
If non-nil, index files in the current directory and all
subdirectories.  If nil, only files in the current directory
are indexed.  This variable is only used when creating the
list of files to index, or when creating the list of files and
the corresponding cscope database.

.P
.B "cscope-name-line-width"
.P
The width of the combined "function name:line number" field in
the cscope results buffer.  If negative, the field is
left-justified.

.P
.B "cscope-do-not-update-database"
.P
If non-nil, never check and/or update the cscope database when
searching.  Beware of setting this to non-nil, as this will
disable automatic database creation, updating, and
maintenance.

.P
.B "cscope-display-cscope-buffer" 
.P
If non-nil, display the *cscope* buffer after each search
(default).  This variable can be set in order to reduce the
number of keystrokes required to navigate through the matches.

.P
.B "cscope-database-regexps"
.P
List to force directory-to-cscope-database mappings.
This is a list of `(REGEXP DBLIST [ DBLIST ... ])', where:

.P
.B "REGEXP" 
is a regular expression matched against the current buffer's
current directory.  The current buffer is typically some source file,
and you're probably searching for some symbol in or related to this
file.  Basically, this regexp is used to relate the current directory
to a cscope database.  You need to start REGEXP with "^" if you want
to match from the beginning of the current directory.

.P
.B "DBLIST" 
is a list that contains one or more of:

.EX
     ( DBDIR )
     ( DBDIR ( OPTIONS ) )
     ( t )
     t
.EE

.P
Here, 
.B DBDIR 
is a directory (or a file) that contains a cscope
database.  If DBDIR is a directory, then it is expected that the
cscope database, if present, has the filename given by the variable,
`cscope-database-file'; if DBDIR is a file, then DBDIR is the path
name to a cscope database file (which does not have to be the same as
that given by `cscope-database-file').  If only DBDIR is specified,
then that cscope database will be searched without any additional
cscope command-line options.  If OPTIONS is given, then OPTIONS is a
list of strings, where each string is a separate cscope command-line
option.

.P
 In the case of "( t )", this specifies that the search is to use the
 normal hierarchical database search.  This option is used to
 explicitly search using the hierarchical database search either before
 or after other cscope database directories.

.P
 If "t" is specified (not inside a list), this tells the searching
 mechanism to stop searching if a match has been found (at the point
 where "t" is encountered).  This is useful for those projects that
 consist of many subprojects.  You can specify the most-used
 subprojects first, followed by a "t", and then followed by a master
 cscope database directory that covers all subprojects.  This will
 cause the most-used subprojects to be searched first (hopefully
 quickly), and the search will then stop if a match was found.  If not,
 the search will continue using the master cscope database directory.

.P
 Here, `cscope-database-regexps' is generally not used, as the normal
 hierarchical database search is sufficient for placing and/or locating
 the cscope databases.  However, there may be cases where it makes
 sense to place the cscope databases away from where the source files
 are kept; in this case, this variable is used to determine the
 mapping.

.P
 This module searches for the cscope databases by first using this
 variable; if a database location cannot be found using this variable,
 then the current directory is searched, then the parent, then the
 parent's parent, until a cscope database directory is found, or the
 root directory is reached.  If the root directory is reached, the
 current directory will be used.

.P
A cscope database directory is one in which EITHER a cscope database
file (e.g., "cscope.out") OR a cscope file list (e.g.,
"cscope.files") exists.  If only "cscope.files" exists, the
corresponding "cscope.out" will be automatically created by cscope
when a search is done.  By default, the cscope database file is called
"cscope.out", but this can be changed (on a global basis) via the
variable, `cscope-database-file'.  There is limited support for cscope
databases that are named differently than that given by
`cscope-database-file', using the variable, `cscope-database-regexps'.

.P
Here is an example of `cscope-database-regexps':

.EX
	(setq cscope-database-regexps
	      '(
		( "^/users/jdoe/sources/proj1"
		  ( t )
		  ( "/users/jdoe/sources/proj2")
		  ( "/users/jdoe/sources/proj3/mycscope.out")
		  ( "/users/jdoe/sources/proj4")
		  t
		  ( "/some/master/directory" ("-d" "-I/usr/local/include") )
		  )
		( "^/users/jdoe/sources/gnome/"
		  ( "/master/gnome/database" ("-d") )
		  )
		))
.EE

.P
If the current buffer's directory matches the regexp,
"^/users/jdoe/sources/proj1", then the following search will be
done:

.TP
1. First, the normal hierarchical database search will be used to
locate a cscope database.

.TP
2. Next, searches will be done using the cscope database
directories, "/users/jdoe/sources/proj2",
"/users/jdoe/sources/proj3/mycscope.out", and
"/users/jdoe/sources/proj4".  Note that, instead of the file,
"cscope.out", the file, "mycscope.out", will be used in the
directory "/users/jdoe/sources/proj3".

.TP
3. If a match was found, searching will stop.

.TP
4. If a match was not found, searching will be done using
"/some/master/directory", and the command-line options "-d"
and "-I/usr/local/include" will be passed to cscope.

.TP
If the current buffer's directory matches the regexp,
"^/users/jdoe/sources/gnome", then the following search will be
done:

.TP
The search will be done only using the directory,
"/master/gnome/database".  The "-d" option will be passed to
cscope.

.TP
If the current buffer's directory does not match any of the above
regexps, then only the normal hierarchical database search will be
done.

.P
.SS * Other notes:

.P
1. The script, "cscope-indexer", uses a sed command to determine
what is and is not a C/C++/lex/yacc source file.  It's idea of a
source file may not correspond to yours.

.P
2. This module is called, "xcscope", because someone else has
already written a "cscope.el" (although it's quite old).

.SH KNOWN BUGS:

.P
1. Cannot handle whitespace in directory or file names.

.P
2. By default, colored faces are used to display results.  If you happen
to use a black background, part of the results may be invisible
(because the foreground color may be black, too).  There are at least
two solutions for this:

.TP
.BI    "2a. Turn off colored faces, by setting `cscope-use-face' to `nil', eg:"
.TP
.BI            "(setq cscope-use-face nil)"

.TP
.BI   " 2b. Explicitly set colors for the faces used by cscope.  The faces are"

.EX
     cscope-file-face
     cscope-function-face
     cscope-line-number-face
     cscope-line-face
     cscope-mouse-face
.EE

.TP
The face most likely to cause problems (e.g., black-on-black
color) is `cscope-line-face'.

.P
3. The support for cscope databases different from that specified by
`cscope-database-file' is quirky.  If the file does not exist, it
will not be auto-created (unlike files names by
`cscope-database-file').  You can manually force the file to be
created by using touch(1) to create a zero-length file; the
database will be created the next time a search is done.