# MANAGED BY CHEF, DO NOT MODIFY # # This is a configuration file for Zabbix agent daemon (Unix) # To get more information about Zabbix, visit http://www.zabbix.com ############ GENERAL PARAMETERS ################# ### Option: PidFile # Name of PID file. # # Mandatory: no # Default: # PidFile=/tmp/zabbix_agentd.pid PidFile=/var/run/zabbix/zabbix_agentd.pid ### Option: LogType # Specifies where log messages are written to: # system - syslog # file - file specified with LogFile parameter # console - standard output # # Mandatory: no # Default: # LogType=file ### Option: LogFile # Log file name for LogType 'file' parameter. # # Mandatory: no # Default: # LogFile= LogFile=/var/log/zabbix/zabbix_agentd.log ### Option: LogFileSize # Maximum size of log file in MB. # 0 - disable automatic log rotation. # # Mandatory: no # Range: 0-1024 # Default: # LogFileSize=1 LogFileSize=0 ### Option: DebugLevel # Specifies debug level: # 0 - basic information about starting and stopping of Zabbix processes # 1 - critical information # 2 - error information # 3 - warnings # 4 - for debugging (produces lots of information) # 5 - extended debugging (produces even more information) # # Mandatory: no # Range: 0-5 # Default: # DebugLevel=3 ### Option: SourceIP # Source IP address for outgoing connections. # # Mandatory: no # Default: # SourceIP= ### Option: EnableRemoteCommands # Whether remote commands from Zabbix server are allowed. # 0 - not allowed # 1 - allowed # # Mandatory: no # Default: # EnableRemoteCommands=0 EnableRemoteCommands=1 ### Option: LogRemoteCommands # Enable logging of executed shell commands as warnings. # 0 - disabled # 1 - enabled # # Mandatory: no # Default: # LogRemoteCommands=0 LogRemoteCommands=1 ##### Passive checks related ### Option: Server # List of comma delimited IP addresses (or hostnames) of Zabbix servers. # Incoming connections will be accepted only from the hosts listed here. # If IPv6 support is enabled then '127.0.0.1', '::127.0.0.1', '::ffff:127.0.0.1' are treated equally. # # Mandatory: no # Default: # Server= Server=<%= node['zabbix']['agent_servers'].join(', ') %> ### Option: ListenPort # Agent will listen on this port for connections from the server. # # Mandatory: no # Range: 1024-32767 # Default: # ListenPort=10050 ### Option: ListenIP # List of comma delimited IP addresses that the agent should listen on. # First IP address is sent to Zabbix server if connecting to it to retrieve list of active checks. # # Mandatory: no # Default: # ListenIP=0.0.0.0 ### Option: StartAgents # Number of pre-forked instances of zabbix_agentd that process passive checks. # If set to 0, disables passive checks and the agent will not listen on any TCP port. # # Mandatory: no # Range: 0-100 # Default: # StartAgents=3 ##### Active checks related ### Option: ServerActive # List of comma delimited IP:port (or hostname:port) pairs of Zabbix servers for active checks. # If port is not specified, default port is used. # IPv6 addresses must be enclosed in square brackets if port for that host is specified. # If port is not specified, square brackets for IPv6 addresses are optional. # If this parameter is not specified, active checks are disabled. # Example: ServerActive=127.0.0.1:20051,zabbix.domain,[::1]:30051,::1,[12fc::1] # # Mandatory: no # Default: # ServerActive= ServerActive=<%= node['zabbix']['agent_servers'].join(', ') %> ### Option: Hostname # Unique, case sensitive hostname. # Required for active checks and must match hostname as configured on the server. # Value is acquired from HostnameItem if undefined. # # Mandatory: no # Default: # Hostname= Hostname=<%= node['fqdn'] %> ### Option: HostnameItem # Item used for generating Hostname if it is undefined. Ignored if Hostname is defined. # Does not support UserParameters or aliases. # # Mandatory: no # Default: # HostnameItem=system.hostname ### Option: HostMetadata # Optional parameter that defines host metadata. # Host metadata is used at host auto-registration process. # An agent will issue an error and not start if the value is over limit of 255 characters. # If not defined, value will be acquired from HostMetadataItem. # # Mandatory: no # Range: 0-255 characters # Default: # HostMetadata= HostMetadata=Linux <%= node['zabbix']['agent_meta'].join(' ') %> ### Option: HostMetadataItem # Optional parameter that defines an item used for getting host metadata. # Host metadata is used at host auto-registration process. # During an auto-registration request an agent will log a warning message if # the value returned by specified item is over limit of 255 characters. # This option is only used when HostMetadata is not defined. # # Mandatory: no # Default: # HostMetadataItem= ### Option: RefreshActiveChecks # How often list of active checks is refreshed, in seconds. # # Mandatory: no # Range: 60-3600 # Default: # RefreshActiveChecks=120 ### Option: BufferSend # Do not keep data longer than N seconds in buffer. # # Mandatory: no # Range: 1-3600 # Default: # BufferSend=5 ### Option: BufferSize # Maximum number of values in a memory buffer. The agent will send # all collected data to Zabbix Server or Proxy if the buffer is full. # # Mandatory: no # Range: 2-65535 # Default: # BufferSize=100 ### Option: MaxLinesPerSecond # Maximum number of new lines the agent will send per second to Zabbix Server # or Proxy processing 'log' and 'logrt' active checks. # The provided value will be overridden by the parameter 'maxlines', # provided in 'log' or 'logrt' item keys. # # Mandatory: no # Range: 1-1000 # Default: # MaxLinesPerSecond=20 ############ ADVANCED PARAMETERS ################# ### Option: Alias # Sets an alias for an item key. It can be used to substitute long and complex item key with a smaller and simpler one. # Multiple Alias parameters may be present. Multiple parameters with the same Alias key are not allowed. # Different Alias keys may reference the same item key. # For example, to retrieve the ID of user 'zabbix': # Alias=zabbix.userid:vfs.file.regexp[/etc/passwd,^zabbix:.:([0-9]+),,,,\1] # Now shorthand key zabbix.userid may be used to retrieve data. # Aliases can be used in HostMetadataItem but not in HostnameItem parameters. # # Mandatory: no # Range: # Default: ### Option: Timeout # Spend no more than Timeout seconds on processing # # Mandatory: no # Range: 1-30 # Default: # Timeout=3 ### Option: AllowRoot # Allow the agent to run as 'root'. If disabled and the agent is started by 'root', the agent # will try to switch to the user specified by the User configuration option instead. # Has no effect if started under a regular user. # 0 - do not allow # 1 - allow # # Mandatory: no # Default: # AllowRoot=0 ### Option: User # Drop privileges to a specific, existing user on the system. # Only has effect if run as 'root' and AllowRoot is disabled. # # Mandatory: no # Default: # User=zabbix ### Option: Include # You may include individual files or all files in a directory in the configuration file. # Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time. # # Mandatory: no # Default: # Include= Include=/etc/zabbix/zabbix_agentd.d/ # Include=/usr/local/etc/zabbix_agentd.userparams.conf # Include=/usr/local/etc/zabbix_agentd.conf.d/ # Include=/usr/local/etc/zabbix_agentd.conf.d/*.conf ####### USER-DEFINED MONITORED PARAMETERS ####### ### Option: UnsafeUserParameters # Allow all characters to be passed in arguments to user-defined parameters. # The following characters are not allowed: # \ ' " ` * ? [ ] { } ~ $ ! & ; ( ) < > | # @ # Additionally, newline characters are not allowed. # 0 - do not allow # 1 - allow # # Mandatory: no # Range: 0-1 # Default: # UnsafeUserParameters=0 ### Option: UserParameter # User-defined parameter to monitor. There can be several user-defined parameters. # Format: UserParameter=, # See 'zabbix_agentd' directory for examples. # # Mandatory: no # Default: # UserParameter= ####### LOADABLE MODULES ####### ### Option: LoadModulePath # Full path to location of agent modules. # Default depends on compilation options. # # Mandatory: no # Default: # LoadModulePath=${libdir}/modules ### Option: LoadModule # Module to load at agent startup. Modules are used to extend functionality of the agent. # Format: LoadModule= # The modules must be located in directory specified by LoadModulePath. # It is allowed to include multiple LoadModule parameters. # # Mandatory: no # Default: # LoadModule= ####### TLS-RELATED PARAMETERS ####### ### Option: TLSConnect # How the agent should connect to server or proxy. Used for active checks. # Only one value can be specified: # unencrypted - connect without encryption # psk - connect using TLS and a pre-shared key # cert - connect using TLS and a certificate # # Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection) # Default: # TLSConnect=unencrypted ### Option: TLSAccept # What incoming connections to accept. # Multiple values can be specified, separated by comma: # unencrypted - accept connections without encryption # psk - accept connections secured with TLS and a pre-shared key # cert - accept connections secured with TLS and a certificate # # Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection) # Default: # TLSAccept=unencrypted ### Option: TLSCAFile # Full pathname of a file containing the top-level CA(s) certificates for # peer certificate verification. # # Mandatory: no # Default: # TLSCAFile= ### Option: TLSCRLFile # Full pathname of a file containing revoked certificates. # # Mandatory: no # Default: # TLSCRLFile= ### Option: TLSServerCertIssuer # Allowed server certificate issuer. # # Mandatory: no # Default: # TLSServerCertIssuer= ### Option: TLSServerCertSubject # Allowed server certificate subject. # # Mandatory: no # Default: # TLSServerCertSubject= ### Option: TLSCertFile # Full pathname of a file containing the agent certificate or certificate chain. # # Mandatory: no # Default: # TLSCertFile= ### Option: TLSKeyFile # Full pathname of a file containing the agent private key. # # Mandatory: no # Default: # TLSKeyFile= ### Option: TLSPSKIdentity # Unique, case sensitive string used to identify the pre-shared key. # # Mandatory: no # Default: # TLSPSKIdentity= ### Option: TLSPSKFile # Full pathname of a file containing the pre-shared key. # # Mandatory: no # Default: # TLSPSKFile=